Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Pentair easy touch control heat?

  1. Back To Top    #1

    Join Date
    Jul 2015

    Pentair easy touch control heat?

    First time using the spa today and I just hit the spa button and it should start warming up.

    My question, if you go to menu, heat, spa temp/src

    Should heat be off or heater.
    My pool guy has it set to off but was just checking.
    Build starting in Aug 2015, 115 ft perimeter 654 feet, IG gunite freeform with spa, 3 hp Pentair VS intelliflow
    520 sq feet Pentair cartridge, Pentair 400 heater, Polaris 280, SWG, travertine coping

  2. Back To Top    #2
    Mod Squad Jimrahbe's Avatar
    Join Date
    Jul 2014
    Bedford, TX

    Re: Pentair easy touch control heat?


    I don't have a heater but the manual says it should be in "Heater". Your main menu page should look something like:

    "Auto..... Heater"
    "SPA... 85 F / 100F"

    With 85 being the current temp and 100 F being the temperature you want the spa to be.

    Jim R.
    Finished in 2015 - 17K Gal, IG, 20' x 25' Almost Rectangular Pool, Pebble finish, three rockport water falls. Pentair Equipment: EasyTouch 4, IC40 SWG, 3 HP VS Pump, CCP520 Cartridge Filter.
    TF100 with SpeedStir and SampleSizer, ColorQ Pro 7, Dolphin Premier Robot Cleaner, added Screen Logic 2, added small 3 person Calder Spa.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts