So after having motor and impeller issues and getting those resolved and then being out of town 2 weeks, I needed to start over with the water and chemicals as the water had turned green and CYA was at least 200.
I drained about 85% of the water out and refilled it with city water (can't wait for the next water bill). I used the TF-100 test kit to test with. CYA is still a bit high but I can't afford to drain and fill yet again. While I was draining I was using the vacuum sweeper to suck up as much algae off the bottom as I could.
FC = 1.5
CC = 0.5
TC = 2.0
TA = 230
CYA = 100
Cl = 0.5
ph = 7.8
Suggestions?
I drained about 85% of the water out and refilled it with city water (can't wait for the next water bill). I used the TF-100 test kit to test with. CYA is still a bit high but I can't afford to drain and fill yet again. While I was draining I was using the vacuum sweeper to suck up as much algae off the bottom as I could.
FC = 1.5
CC = 0.5
TC = 2.0
TA = 230
CYA = 100
Cl = 0.5
ph = 7.8
Suggestions?