- May 17, 2011
- 16
HI all.
Having a problem with my SWG. I have aqua rite goldline controls rev 1.40.
I recently replaced the cell with an aftermarket Chlorinator pro replacement for turbo cell 15.
it has worked fine throughout the summer, now I am getting cold reading at my panel and chlorine generation has stopped.
I have no chlorine in the pool, I checked the thermometer in the pool it reads 74, the panel reads 49.
I think there is a problem with the temp sensor, as it is not giving an accurate reading and this is halting chlorine production.
I did some research and from what i found the temp sensor is located in the cell, is this correct?
If this is the case I have a 2 year warranty on the cell and can ask for a replacement.
Then issue seems to be intermittent, because I went back out later and re started the system and the temp now read 74 and it was generating chlorine.
I think there is a prob with the sensor wherever it is located.
Please help me determine:
1. Where is the sensor that provides temp reading for the panel?
2. if intermittent issue, what can I do to troubleshoot to isolate the problem with certainty.
Thanks for the help
Having a problem with my SWG. I have aqua rite goldline controls rev 1.40.
I recently replaced the cell with an aftermarket Chlorinator pro replacement for turbo cell 15.
it has worked fine throughout the summer, now I am getting cold reading at my panel and chlorine generation has stopped.
I have no chlorine in the pool, I checked the thermometer in the pool it reads 74, the panel reads 49.
I think there is a problem with the temp sensor, as it is not giving an accurate reading and this is halting chlorine production.
I did some research and from what i found the temp sensor is located in the cell, is this correct?
If this is the case I have a 2 year warranty on the cell and can ask for a replacement.
Then issue seems to be intermittent, because I went back out later and re started the system and the temp now read 74 and it was generating chlorine.
I think there is a prob with the sensor wherever it is located.
Please help me determine:
1. Where is the sensor that provides temp reading for the panel?
2. if intermittent issue, what can I do to troubleshoot to isolate the problem with certainty.
Thanks for the help