SWG Control panel (AquaRite) behaves oddly. Sometimes it doesnt generate chlorine, and all 4 red lights flash continuously during the time the pump is running. Sometimes, the 4 green lights on top flash continuiusly, and i dont know if it is generating chlorine. Sometimes it appears to be working fine, but i cannot read the display when i scroll through the diagnostic display. Whenever it is behaving normal, i see that the salt level is at 3800, which is too high, as it should be 3400 max, per the manual. Could the high salt cause the problems im having?
I bought a home warranty with optional coverage for my pool equipment and separate opt coverage for salt water system. when i called to have it repaired, the pool repair company said the display board needs to be replaced. The warranty company denied the claim, stating the coverage is for "the cell and circuit board only". This makes no sense to me. Does anyone else have experience with this, or the type of problem i am having with the SWG?
Sent from my SGH-M919 using Tapatalk
I bought a home warranty with optional coverage for my pool equipment and separate opt coverage for salt water system. when i called to have it repaired, the pool repair company said the display board needs to be replaced. The warranty company denied the claim, stating the coverage is for "the cell and circuit board only". This makes no sense to me. Does anyone else have experience with this, or the type of problem i am having with the SWG?
Sent from my SGH-M919 using Tapatalk