Hi all, After lots of advice to get a Taylor kit finally got one whilst my wife was visiting the US for work. So we are coming into spring here so pool will soon be back in use shortly. Over winter I do very little other than the odd vacuum for leaves so other than the Filter and SWG running it gets little attention from me.
Visually the Pool water is crystal clear so a reasonable base to start from.
Anyway Results of first test with the new kit are below.
PH 7.8
FC 3
CC 0
TC 3
CH 275
TA 100
CYA ~10
I have added Stabiliser todayand will test again in a week or so I thought the TF100 Kit allowed for a Salt test but appears not, so I will just use the Pool shop for that for now. With winter rains and backwashing (and going on past years experience) I will need to add 1 - 2 bags of salt.
But other than that any feedback on numbers above?
Thanks
Visually the Pool water is crystal clear so a reasonable base to start from.
Anyway Results of first test with the new kit are below.
PH 7.8
FC 3
CC 0
TC 3
CH 275
TA 100
CYA ~10
I have added Stabiliser todayand will test again in a week or so I thought the TF100 Kit allowed for a Salt test but appears not, so I will just use the Pool shop for that for now. With winter rains and backwashing (and going on past years experience) I will need to add 1 - 2 bags of salt.
But other than that any feedback on numbers above?
Thanks