Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Older hot tub will not fire up - Baja Casita

  1. Back To Top    #1

    Older hot tub will not fire up - Baja Casita

    We have been using this older (early 90s) Baja Casita 4 person hot tub 2-3 times per week but now nothing is working, GFCI good and both sets of breakers are good. I am getting full power into the box. My question is where to start, I am decent with wiring but not sure if I start with circuit board or relays or what?

    The pump and controls have a premier pump and pool product sticker I can get model #s if needed, but cannot seem to find a schematic

    When the hot tub was working the pump would always circulate water and heater just kick on when needed - not sure if that helps or not.

    I welcome any advice on this issue.
    16x48 Coleman AGP - Hayward SP1091LX Skimmer
    Pentair Dynamo 1HP Pump/Hayward 18" sand filter
    Located in Mid-MO

  2. Back To Top    #2

    In the Industry

    Join Date
    Jun 2015
    Location
    Wildomar, California
    Posts
    423

    Re: Older hot tub will not fire up - Baja Casita

    Did you reset the main power source breakers. If so, start there by checking the voltage out of the main breakers, then the line voltage lugs in the spa.

  3. Back To Top    #3

    Re: Older hot tub will not fire up - Baja Casita

    Yes I did, I have good power all the way to the circuit board panel, but not sure how to check beyond that.

    Thanks
    16x48 Coleman AGP - Hayward SP1091LX Skimmer
    Pentair Dynamo 1HP Pump/Hayward 18" sand filter
    Located in Mid-MO

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •