Hi, I am new to all this salt systems and all kind of pools actually.
I just replaced my old T-cell-15 (tested in 3 stores and it was dead ....after 6 years) with new one.
My AquaRite board (also few years old) readings are good, 3200ppm salt, 25V, 6amp, -3100, r1.32
Power on and generating on.
I have tested water at 3 different local pool stores, and two said 5 FC and 3 FC, one stored said 0ppm FC. stabilizer 80ppm, 7.6ph, No phosphate.
I have spots of green algae.
The box gets really hot.I have set the board to 90%.
Question: Do I need a new PCB board/panel (GLX-PCB-RITE Aqua Rite Main Circuit Board), is it lying to me that is producing chlorine when in fact it is not?
Thanks in advance.
I just replaced my old T-cell-15 (tested in 3 stores and it was dead ....after 6 years) with new one.
My AquaRite board (also few years old) readings are good, 3200ppm salt, 25V, 6amp, -3100, r1.32
Power on and generating on.
I have tested water at 3 different local pool stores, and two said 5 FC and 3 FC, one stored said 0ppm FC. stabilizer 80ppm, 7.6ph, No phosphate.
I have spots of green algae.
The box gets really hot.I have set the board to 90%.
Question: Do I need a new PCB board/panel (GLX-PCB-RITE Aqua Rite Main Circuit Board), is it lying to me that is producing chlorine when in fact it is not?
Thanks in advance.