Pump is leaking and terribly noisy. Read the threads on replacing motors and seals, but I am pretty sure a new pump is best option considering the terrible DIY Disaster this new-to-us house/pool has been. Would like to go dual speed - electric rates are $0.16 peak and 0.08 off peak hours, pool open 4-5 months a year. Typically run the pump at night (off peak), but sometimes want to vacuum or heat during day/peak hours.
Pool store warns that dual speed pump may be too weak for heater to fire. Looking for advice on replacement pump...
current pump... STA-RITE Dyna-Glas 1 HP, 115/230v, 60 Hz, .75kW. Pressure gauge on filter normally reads 12 or 13 PSI. Equipment in pool shed about 23' from shallow end skimmer at deck height. Two skimmers and three returns. No drain. Lines are 2 inch all around (I think). No cleaner currently, but could be a future addition.
Pool store warns that dual speed pump may be too weak for heater to fire. Looking for advice on replacement pump...
current pump... STA-RITE Dyna-Glas 1 HP, 115/230v, 60 Hz, .75kW. Pressure gauge on filter normally reads 12 or 13 PSI. Equipment in pool shed about 23' from shallow end skimmer at deck height. Two skimmers and three returns. No drain. Lines are 2 inch all around (I think). No cleaner currently, but could be a future addition.