Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 8 of 8

Thread: Problems with CompuPool Warranty

  1. Back To Top    #1

    Problems with CompuPool Warranty

    I bought a RJ30g from CompuPool in May of 2013. The cell went out in March of 2014, I was getting a water fault error even though the cell was fully submerged and had been cleaned recently/had no scale on the blades. I filed a claim on 3/14/14 and their service people were initially very helpful, but the claim drug on for a long time as the replacement parts were on "back order." I followed up numerous times until finally I had to get pushy/aggressive with them. It wasn't until I was basically rude to them that they "found" the part I needed in their warehouse and shipped it out to me on 6/5/14.

    Fast forward to this May of this year and I start having problems again. I call their customer service on 5/29 and diagnose the problem with them - the board failed and they would send me a new one but they are on back order. I follow up again in mid June and they are still on back order and they have no idea when more will be shipped from Australia. I follow up again in July and again in August and finally have to resort to being pushy/aggressive again. Low and behold they "find" a board that I need after a call on 8/17 and request updated CC info from me to process the order. I sent updated information back to CompuPool on the same day and still don't have anything back yet. I call them earlier today and am now told that I actually need both boards, the main board and the display board, to be replaced and those are still on back order with no time frame for when they will come in.

    I've asked if I can just have my money back so I can go find another solution and was told that is not a possibility. My question for the TFP board is if anyone else has had this experience and if I have any other recourse.

    I'm extremely frustrated that I'm having to lug jugs during the peak of summer in Houston and am getting close to the point of my SWG system being inoperable more than it's been operable for me.

    Any help/advice that the board has would be greatly appreciated.

  2. Back To Top    #2
    bobodaclown's Avatar
    Join Date
    Apr 2011
    Location
    Lakeland, FL
    Posts
    2,351

    Re: Problems with CompuPool Warranty

    Hello,
    Have you tried contacting Circupool?

    CircuPoolŪ Systems · (888) 206-9938
    40316 Hempstead Hwy,
    Waller, TX 77484

    I know some CircuPool systems are made by Compupool and the RJ30g system is supported/made by Compupool, but mabye Circupool has some parts in stock.

    Good luck.
    17K Kidney Shaped Pool Concrete (Diamond Bright) Pool, 3/4 hp 2 speed 115V Sta-rite Duraglas PEA5D-180L/P2R5D-181L (Impeller C105-92PS Diffuser C1-216P), 1.5 piping, Pentair CC100 Filter , Heat Siphon 100K BTU Heat Pump Pool Heater, Flow meter Blue White Flowmeter Model No. F-30150P, Hayward Astrolight SP0581N, SWCG CalimarTitanium Edition TE45 , Dolphin Nautilus Plus with CleverClean, Lakeland Florida

  3. Back To Top    #3
    Mod Squad YippeeSkippy's Avatar
    Join Date
    Jan 2012
    Location
    'burbs of Augusta, Georgia
    Posts
    6,470

    Re: Problems with CompuPool Warranty

    Quote Originally Posted by The Royal We View Post
    I bought a RJ30g from CompuPool in May of 2013. The cell went out in March of 2014, I was getting a water fault error even though the cell was fully submerged and had been cleaned recently/had no scale on the blades.
    You submerged the entire cell or you filled it up entirely??? Did you use MA?
    My Amazon Smile for November12K Fiberglass IG, Infinity 4000 automatic cover, SWCG, Hayward Sand Filter, Hayward 1.5 Pump, Doheny Discovery Robot, Savi Melody LED pool lights, outdoor speakers and other assorted doo-dads. Sundance Altamar Hot Tub.
    Our pool build--> Our Pool Solved Our Sloping Yard Skippy's Cheap Pool Cooler -->Skippy's New Fountain

  4. Back To Top    #4

    Re: Problems with CompuPool Warranty

    By submerged I meant that the cell was full of water and there was no reason for the unit to be throwing off a water fault error. When I cleaned the cells I followed the protocol from CompuPool and used a diluted MA solution to clean the cell.

    Thanks for the replies. I have not followed up directly with CircuPool in Waller, TX, but will try doing that as well.

  5. Back To Top    #5

    Re: Problems with CompuPool Warranty

    I too am also waiting on "parts from Australia" for almost a month....
    16x32 vinyl liner
    SWCG / D.E. / Dolphin4
    TFTestkit

  6. Back To Top    #6
    franke's Avatar
    Join Date
    May 2011
    Location
    Forest, VA
    Posts
    32

    Re: Problems with CompuPool Warranty

    I have been waiting for a replacement system for well over a year.
    25000 gal Rectangle IG, Vinyl, SWCG -CircuPool SI45 Plus, Sand Filter, 3/4 hp Pentair pump with US motors echotech EZ variable speed motor

  7. Back To Top    #7

    Re: Problems with CompuPool Warranty

    amazing what you can get when you push someone's buttons...mysteriously both the parts I needed somehow someway be came magically available this morning ready to ship. Something definitely bizarre going on with compupool / circupool, I urge others to do their due diligence before purchasing either. Safe to say I will not be buying anything else from them!
    16x32 vinyl liner
    SWCG / D.E. / Dolphin4
    TFTestkit

  8. Back To Top    #8

    Re: Problems with CompuPool Warranty

    Still waiting. Called again today and they have not received any replacement parts. Raised voice and pleading was no help.

    Don't ever buy anything from these jokers. What's the point in a warranty!?

    Avoid anything from compupool / circupool like the plague. Having service this terrible is not a sustainable business model.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •