Don't know if I am over analyzing things. Pool seems and has been fine all summer. Just installed June 2015- 24,000 gallon SWG vinyl liner. I Have had to add this summer so far: stabilzer 1x at the beginning, salt 1x, PH 2x, and shock 2x. Was away for 2 days and when got home checked pool and again, all was fine. I have been testing the pool all summer with Aquacheck strips (I know, I know, not the best method of testing water). I decided to take water to Lesile's since I haven't really looked at numbers in detail. My readings basically stated that all was fine (except for hardness and phosphates; which from reading pool school, I don't need to address those issues anyway). However, it seems that even though Lesile's states all numbers are fine, from the charts I see in Pool School, it seems like I don't have enough FC and CYA. Can anyone weigh in on this based on my numbers below?
Here are the number's Lesile's gave me:
FAC 2
TAC 2
CH 130
CYA 60
TA 80
PH 7.6
Phosphates 1000
Salt at 3000
Generator output at 85%-90%. Its been a dry and sunny in PA the last 2 months.
Thanks in advance for advice.
Here are the number's Lesile's gave me:
FAC 2
TAC 2
CH 130
CYA 60
TA 80
PH 7.6
Phosphates 1000
Salt at 3000
Generator output at 85%-90%. Its been a dry and sunny in PA the last 2 months.
Thanks in advance for advice.