Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Board Problems

  1. Back To Top    #1

    Join Date
    Aug 2015
    Biloxi, MS

    Board Problems

    We recently had a storm and my gold line box started showing an incorrect salt reading. I pulled the board out and the usual "big black disk" was intact but there were two small red disks next to where the power wires connect and they were completely fried. What are they and can I replace them? ANY help would be great. thanks

  2. Back To Top    #2

    Join Date
    Mar 2015
    Sugar Land , TX

    Re: Board Problems

    Can you post your model number and a picture of the board.
    8500 gallon IG Pebble Sheen with Spa. 3hp Pentair VS Intelliflo ( pool ), 3/4 hp WhisperFlo ( water feature ),Pentair Racer, 400K Pentair heater, Pentair 500sqft Cartridge filter, EasyTouch 8, Stenner 45mp2 15gallon wired to ET8

  3. Back To Top    #3

    Re: Board Problems

    If they're RZ1 and RZ2, I think that they are part V150LA2P.

    Can you post the diagnostics?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts