Newbie question here. My pool/spa was completed late last year. The spa has ten jets and is supplied by two separate blowers and a separate pump. Not sure if the blowers are feeding separate jets in the spa or if they are working in parallel and connected to all 10 jets.
The bubbles and pressure coming out of the jets that are closest to the pool equipment (where the blowers are located) are significantly stronger than the jets on the side of the spa that are farthest from the pool equipment. Is this normal? Can the jets be adjusted to distribute the pressure more evenly?
Can this unbalance be because of a missing Venturi Nozzle? I haven't checked to make sure they were all installed.
The bubbles and pressure coming out of the jets that are closest to the pool equipment (where the blowers are located) are significantly stronger than the jets on the side of the spa that are farthest from the pool equipment. Is this normal? Can the jets be adjusted to distribute the pressure more evenly?
Can this unbalance be because of a missing Venturi Nozzle? I haven't checked to make sure they were all installed.
Last edited: