So i get my pool dialed in and then my chlorine levels slowly drop to null. My SWG is not throwing any error codes, when on it is producing bubbles in the water so it is creating chlorine and i have it running 6 hrs a nite per the manual.
My CYA are currently low but when last checked this was not the case.
FC 0.5
CC .05
TC 1
Ch 125
Ph 8.2
Ta 180
CYA 40
Salt 3000ppm
I am going add, per the pool calc, 41 ox of bleach to get FC back up to 6.
24 oz of Stabilizer
8 lbs of salt to get back to 32ppm
Ph and TA is currently high. Not sure how to lower them. Never had that problem before.
The pool has been getting a lot of use and it has been HOT here, 110+. The chlorine might be just burning off faster than being created.
My CYA are currently low but when last checked this was not the case.
FC 0.5
CC .05
TC 1
Ch 125
Ph 8.2
Ta 180
CYA 40
Salt 3000ppm
I am going add, per the pool calc, 41 ox of bleach to get FC back up to 6.
24 oz of Stabilizer
8 lbs of salt to get back to 32ppm
Ph and TA is currently high. Not sure how to lower them. Never had that problem before.
The pool has been getting a lot of use and it has been HOT here, 110+. The chlorine might be just burning off faster than being created.