Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 5 of 5

Thread: Do Kreepy Krawley type vacs really work reliably?

  1. Back To Top    #1

    Do Kreepy Krawley type vacs really work reliably?

    I have an older 21,200 gal VL IG pool. Has a hopper deep end with an exit ladder, cut out steps in the shallow end, and one skimmer and one return. Had a main drain in the deep end but it went bad a few years back so I plugged it.

    With just the one return I am not getting great circulation, and was wondering if a kreepy krawley type vacuum would help, since it will pull water from all around the pool. I see a knock off on Amazon with good reviews for $87 shipped which definitely has my attention.

    Anyone with experience with these type of suction cleaners, do they work reliably? Do they get stuck a lot? Do a good job cleaning?


  2. Back To Top    #2
    BobbyR's Avatar
    Join Date
    Jun 2013
    Toronto, Ont

    Re: Do Kreepy Krawley type vacs really work reliably?

    My experience with suction cleaners is that they just don't clean the entire pool leaving whole sections uncovered no matter how many adjustments you make. And yes, they get stuck, usually on the main drain. Meanwhile, the skimmer doesn't work when they are operating so floating debris builds up around the edges. In your case though a Kreepy or Cuda could quite possibly improve circulation. For $87, you haven't a lot to lose.
    Lagoon 40x22, Vinyl, 27,000 gal, 1HP WhisperFlo Pump, Pentair 60 gpm Sand filter, Hayward Brominator (used for chlorine pucks only when away), Rheem gas heater, Dolphin M4 Robot
    Waterfall on separate dedicated pump

  3. Back To Top    #3

    Re: Do Kreepy Krawley type vacs really work reliably?

    Thanks. I was hoping more people here used or had used them.

  4. Back To Top    #4

    Join Date
    May 2015
    Chickasha, OK

    Re: Do Kreepy Krawley type vacs really work reliably?

    My parents used a Kreepy Krauley in their pool when I was growing up (but it was kind of the only option back then...). Once I moved out, they ditched the Kreepy for a Barracuda. When I bought my house, I "inherited" their Kreepy and Barracuda when they switched to a TigerShark.

    I have used both the Kreepy and the Barracuda, and have reached the same conclusion: Neither of them cleans 100% of the pool, and neither copes well with a deep end. Maybe I missed something, but I could never get either the Kreepy or the 'Cuda to maintain good contact with my pool surface.

    If I situated the weights so it was level in the shallow end, it would be "toe up" in the deep end. Move the weights to level it out in the deep end, and it would be "heel up" in the shallow end. This frustrated me beyond belief, so I rolled my pennies and bought a Hayward TigerShark QC.

    Having said all that, a suction side cleaner like the Kreepy or 'Cuda would help with your circulation issues. Just don't expect to never have to brush or manually vacuum your pool...
    25,000 gallon freeform gunnite/plaster, built in the 1970s/80s; Sta-Rite 9463004 575-lb. sand filter; Sta-Rite DuraGlas/Max-E-Glas (P2RA5F-125L) single-speed 1.5 HP pump, manufactured 12/1993 (1M93M).
    Helpful links: TFTestKits; Pool School; ABCs of Pool Water Chemistry; Chlorine/CYA Chart; PoolMath; SLAM - Shock Level And Maintain

  5. Back To Top    #5

    In the Industry

    Join Date
    Jun 2015
    Wildomar, California

    Re: Do Kreepy Krawley type vacs really work reliably?

    I've used both the Barrracuda and Kreepy for years in lots of pools. They're really similar. They will clean your pool but never all of it, and can get stuck. But they help keep your pool cleaner.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts