I was messing with the backwash push pull valve and I mistakenly left the pump on for a few seconds when it was set to backwash. The pump pushed the water out the backwash for a little bit and then it stopped. I hoped a few seconds wouldn't be a big deal but it won't turn on anymore. No sounds squat nothing seems to happen when I flip the switch on the timer. No signs of any burning smell or humming, nothing.
The timer box doesn't seem to be getting any sort of power. THe gears inside aren't turning. No lights come on when I flip the switch. I checked the circuit breaker that is supposedly for the pool. Seems to be in the on position.
Pump is hayward energyflo RS .99HP
timer is one of those old fashion dial t101 things.
Either its not getting power from the timer box or its broken. How can I figure out or solve which?
Thanks
The timer box doesn't seem to be getting any sort of power. THe gears inside aren't turning. No lights come on when I flip the switch. I checked the circuit breaker that is supposedly for the pool. Seems to be in the on position.
Pump is hayward energyflo RS .99HP
timer is one of those old fashion dial t101 things.
Either its not getting power from the timer box or its broken. How can I figure out or solve which?
Thanks