Sanger TX pool build

Fordracing19

0
LifeTime Supporter
May 11, 2015
84
Sanger TX
After tons of rain in May and June our PB finally caught up to us. Not much progress as they didn't get here until 4pm today. I also have the GO Pro setup for a time lapse that I will put together when everything is done.




SANGER, TX
SCOPE OF WORK:
APPROVED BUILDING PLAN
110’ PERIMETER SWIMMING POOL/708 SQ. FT/ 22,000 GALLONS
TANNING LEDGE
1 LOVESEATS
GROTTO WATERFALL
EXCAVATION:
TRACKHOE EXCAVATION
PREGRADE

DEPTH: 4’ – 6’-5’ PLAYPOOL

REBAR:
½” STEEL ON 10” CENTERS-5” IN STRESS AREAS
BEAM WITH 4 BARS
ALTERNATE BARS THROUGH THE BREAK

PLUMBING:
DUAL DRAINS IN POOL
2 SKIMMERS IN POOL
2” SUCTION / 1.5” RETURN
7 RETURNS
1 CLEANER LINE
PRESSURE TESTING
2” LINE FOR WATERFALL
1 ½” LINE FOR BUBBLER IN TANNING LEDGE
FILL LINE TO HOSE BIB

ELECTRICAL:
JANDY POWER CENTER
2 JANDY LITE WITH NICHE
BONDING OF POOL, DECK, LIGHTS, AND ANY OTHER METAL ITEMS
GFCI PROTECTED LIGHTING
JANDY P-4 PDA POOL REMOTE

GUNITE:
8” TO 12” 6 SACK MIX
100% NATURAL SAND MIX
3 YEAR LIMITED WARRANTY
NO REBOUND IN POOL

TILE, COPING, AND STONE
6” WATERLINE TILE
STONE COPING OR EQUIVALENT
100’ OF CHOPPED STONE FOR RAISED BEAM AND RETAINING WALL EXTENSIONS
57’ OF COPING FOR WALLS
30’ OF STEPS
STEP SPOTTERS
2.5’ TALL GROTTO WATERFALL

DECKING:
850 SQ. FT OF STAMPED AND STAINED DECKING
75’ OF 4” DECK DRAIN PIPE
CUSHION SAND BASE
3.5” TO 4” THICK
3/8” REBAR ON 18” CENTER
TAN DECK-O-SEAL MASTIC JOINT

PLASTER:
WHITE PLASTER INTERIOR FINISH WITH BLUE QUARTZ

POOL EQUIPMENT: (3 YEAR PARTS AND LABOR ON JANDY, POLARIS, AND ZODIAC)
2.0 HP JANDY STEALTH
460 CARTRIDGE OR DEV 60DE FILTER
2 JANDY POOL LIGHT (LED LIGHT COLORED)
PDA REMOTE
6614 AP1400 POWERCENTER
AQUAPURE SALT CELL
POLARIS 280 POOL SWEEP WITH BOOSTER PUMP
JANDY VALVE ACTUATOR
TAYLOR TEST KIT
POLE, BRUSH, RAKE

CLEAN UP/START UP:
FINAL CLEAN AND GRADE OF POOL AND ACCESS AREA
START UP AND CALIBRATION OF POOL EQUIPMENT
WATER BALANCE
WARRANTY OVERVIEW
POOL SCHOOL AND INSTRUCTIONS
 
9001d2c21ed6bbd433113fe01f73b9a8.jpg
aef0b10b26c5382d4e6c2a71116f6e4d.jpg
271ee53e4ec87188f44b367d73d74aa8.jpg
1ab83dc81683d43c38253026ebf977cc.jpg


Sent from my SAMSUNG-SM-N910A using Tapatalk
 

Enjoying this content?

Support TFP with a donation.

Give Support
I feel for you on the waiting. Jason lived over in Iowa Park near Wichita Falls for years, but is living back in Muenster now. He usually does around 75 pools per year and this year is especially busy. Jason has been building pools for a long time, and the crews you will see have worked for him for a long time as well. He is a good communicator, and he goes out of his way to make sure you are satisfied. Good luck with the build.

- - - Updated - - -

What kind of Ford and what kind of racing?
 
Awesome. I've been drag racing for over 20 years, but haven't raced much in the last 2-3 years. I raced there at Denton years ago before we reopened the track in Wichita Falls. I have a 67 ford falcon that I just got done building a big block 555 this year. Still haven't ran it yet, but I may get it out by this fall. Kids sports have been eating up all my time the last few years.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.