I ended up finding the Taylor 2006c on ebay and happy I spent the coin for it. So much easier to trouble shoot now and solve problems if they arise.
First Results
FC - 1.50
CC - 0.5
PH 7.8
TA - 160
CH - 220
CYA - 65
I am still using a chlorinator with the biogaurd silk sticks but plan on switching to bleach very soon. My test was completed at dawn when the sun was down and then I did another Chlorine test this morning.
Morning Results
FC - 1.00
CC - 0.5
This is with the chlorinator on high (5) with the pump running at 1800 rpm all night, seems like losing this much FC chlorine while the chlorinator is open and no sunlight should not happen
Could the high TA cause the FC to get consumed or is it safe to say that I might have some organic material consuming the FC
Thinking I should SLAM but any other thoughts before I go ahead with that ?
Also should I bring down the CYA a bit - (40-50) and also the TA down to 80-90 before I SLAM or can this be adjusted later ?
Thanks for your help
First Results
FC - 1.50
CC - 0.5
PH 7.8
TA - 160
CH - 220
CYA - 65
I am still using a chlorinator with the biogaurd silk sticks but plan on switching to bleach very soon. My test was completed at dawn when the sun was down and then I did another Chlorine test this morning.
Morning Results
FC - 1.00
CC - 0.5
This is with the chlorinator on high (5) with the pump running at 1800 rpm all night, seems like losing this much FC chlorine while the chlorinator is open and no sunlight should not happen
Could the high TA cause the FC to get consumed or is it safe to say that I might have some organic material consuming the FC
Thinking I should SLAM but any other thoughts before I go ahead with that ?
Also should I bring down the CYA a bit - (40-50) and also the TA down to 80-90 before I SLAM or can this be adjusted later ?
Thanks for your help