Help clear my pool

Jul 8, 2015
2
Carriere, MS
Tried everything from high chlorine level to flocking, etc. yesterday I brought a water sample to Leslie's because I could not clear the pool. I was told to try clear aid clarifier. She told me to use the entire bottle. Leave your pump running for 48 hours without shutting off or backwashing. This will take care of the "green." 24 hours later the water is greener then yesterday! I checked my levels an they are as follows:
Alk-120
PH-8.2
FC-2
HRD-100
CYA-60
Prior to the Clear Aid treatment, reading was:

ALK-100
PH -7.6
FC-3
HRD-100
CYA-100
How can I clear this up?
 
Welcome to the forum. Full SLAM instructions in Pool School. Get that PH down to 7.2 before you start. You will also find that your CYA level is gonna be a hindrance to reaching SLAM level for your pool. I'd do a 1/3 drain before you start if possible, and retest your cya level as it could be much higher than 100.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.