Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Polaris 280

  1. Back To Top    #1

    Polaris 280

    I purchased a replacement 280 and it has started to ride on 2 wheels. I checked the idler armm for debris and it seems to be operating correctly. I adjusted the balance float as well without any improvement. It is only an 11k pool and the cleaner needs to runs for several hours to complete it task. Does any one have any other suggestions?


  2. Back To Top    #2

    steveg_nh's Avatar
    Join Date
    Oct 2013
    Southern NH

    Re: Polaris 280

    How is the jet pointing on the back of the unit?
    24'x40' 25k gal Imperial Mountain Pond IGP, full 28 mil VynAll Ocean Breakers liner. All Hayward system: 140k BTU HeatPro heat pump, 3/4HP single speed TriStar 2" Pump, DE6020 filter, AquaPlus Automation/Salt Chlorination, remote controls, ColorLogic 4.0 lighting. Polaris 280 w/PB4-60 BP. TF100 & K1766 test kits. Rinox Palazzo pavers and Spherik coping. Pool installed 9/2013, project completed 6/16/14.

  3. Back To Top    #3

    In the Industry
    malcolmb5325's Avatar
    Join Date
    Sep 2009
    Sydney, Australia

    Re: Polaris 280

    which 2 wheels? have you checked the rpm's should be between 28 - 32 rpm's.
    16,000lts Fibreglass, Magna Mineral Pool Water
    Jandy CV340 Cartridge filter, Zodiac TRi SWC, Z4 iAqualink, Jandy Laminar Jets, Solar Heating, Spa Jets with Jandy 1.5hp Epump operating everything.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts