I am trying to install a regular 120v outlet and be able to turn it on/off remotely. I was hoping that this was as simple as wiring the outlet to Aux 3 for example, but, when I activate Aux 3 there is no electricity on the relay connectors. Any hint?
Jandy RS-PS4 Wiring
- Thread starter gonzo
- Start date
One side of the Aux 3 relay contact must be fed from a 120v circuit.
26700 gal, vinyl, SWG, Hayward Goldline controls, T-15 Cell, 20gpm/ft2 sand filter, 1 hp pump
26700 gal, vinyl, SWG, Hayward Goldline controls, T-15 Cell, 20gpm/ft2 sand filter, 1 hp pump
It make sense, thanks Knjakeman for the hint. The relay has two line terminals (input voltage) and two load terminals (equipment or outlet). Now I have to figure it out, where to get the 120v inside the panel.
That should come from a circuit breaker to the input. Do you have any spare circuit breakers ?
Knj
Knj
I have the space, but not the circuit breaker. I was just getting the info to go and buy one.