It is currently May 25th, 2012, 6:45 pm

All times are UTC - 6 hours [ DST ]



 Page 1 of 1 [ 7 posts ] 
Author Message
 Post subject: Talcum Powder
PostPosted: July 7th, 2010, 10:47 am 
Registered User

Joined: July 24th, 2009, 1:51 am
Posts: 24
Location: Mission Viejo, CA
Hello all,

It is pool season again and I am back. It is decided that we're only going to have the pool up July-September every year since that is when people would be using it, and we don't really feel like having to care for a pool we're not using the other 9 months.

Anyway, when I packaged up my pool at the end of the season last year, it said to use talcum/baby powder on the liner to keep it dry while in storage. So this year when I set it up, I did not think it was necessary to wash out the talcum power before filling it because I figured the pump filter and chemicals would clean it out. However this does not seem to be the case; the water will be clear after running the pump for the 4.5 hours, but as soon as people are swimming the water becomes cloudy again which I suspect is the talcum power getting stirred up from the bottom. The pool has been up for 2 weeks at this point.

Any suggestions for filtering out whatever is causing the water to become cloudy? Do they make finer filters for the pump I have?


Last edited by pomprocker on July 7th, 2010, 11:28 am, edited 1 time in total.


_________________
12'x36" Metal Frame Intex AG Pool - 2119.5 Gallons
GAME 4510 1/2 HP Pump & Sand Filter w/ ZeoSand
Offline
 Profile  
 
 Post subject: Re: Talcum Powder
PostPosted: July 7th, 2010, 11:17 am 
Site Admin
Site Admin
User avatar

Joined: May 7th, 2007, 3:03 pm
Posts: 23820
Location: Silver Spring, MD
That doesn't sound like it has anything to do with the talcum powder. You should post a full set of water test results. It is probably something to do with your chemical levels.



_________________
19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
TFP Admin. Creator of The Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School
Offline
 Profile  
 
 Post subject: Re: Talcum Powder
PostPosted: July 7th, 2010, 11:18 am 
Special Contributor
Special Contributor

Joined: April 1st, 2007, 8:12 am
Posts: 11344
Location: Raleigh, NC
Posting a full set of test results is about the only way to keep from simply guessing at the problem. If you are positive that is the cause, continued filtration is the only way I can think to remove it.



_________________
Dave S.
Site Owner
TFTestkits owner
TFTestkits , Pool Calculator , Pool School
Offline
 Profile  
 
 Post subject: Re: Talcum Powder
PostPosted: July 7th, 2010, 11:27 am 
Registered User

Joined: July 24th, 2009, 1:51 am
Posts: 24
Location: Mission Viejo, CA
test results are fine...the water is newish < 3 weeks



_________________
12'x36" Metal Frame Intex AG Pool - 2119.5 Gallons
GAME 4510 1/2 HP Pump & Sand Filter w/ ZeoSand
Offline
 Profile  
 
 Post subject: Re: Talcum Powder
PostPosted: July 7th, 2010, 11:30 am 
Site Admin
Site Admin
User avatar

Joined: May 7th, 2007, 3:03 pm
Posts: 23820
Location: Silver Spring, MD
"Fine" doesn't tell us anything. Everyone has a different definition of what "fine" is, and we have no way of guessing what yours is. If you post a full set of test results it is very likely we will see something in the numbers that can help your problem.



_________________
19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
TFP Admin. Creator of The Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School
Offline
 Profile  
 
 Post subject: Re: Talcum Powder
PostPosted: July 7th, 2010, 12:18 pm 
Lifetime Supporter
Lifetime Supporter
User avatar

Joined: April 17th, 2010, 6:41 pm
Posts: 1291
Location: East Texas
.......NEW................doesn't mean anything either!



_________________
16x32x52" Steel Cornelius Miramar AGP Vinyl liner 12,100 gal. Buried 2 ft.
1.5 hp Speck pump 85 g.p.m. 22" 250lb. sand filter hard plumbed
Pool Rover Jr. TF100 Test Kit
Margaritaville frozen concoction maker!
Offline
 Profile  
 
 Post subject: Re: Talcum Powder
PostPosted: July 9th, 2011, 7:40 pm 
New User

Joined: July 9th, 2011, 7:25 pm
Posts: 1
i have the same problem with the talcum powder and i assume you will need to vaccumn it out as soon as you get pool up (before you add salt if using a salt water system) it seems to go through alot of filters with my pool. it has been 2 months and still getting it out. i am gone alot so it is hard for me to get it out without help from others. if you will use panty hose on the end of your vaccumn it will hold the small particles and get it out along with sand. hope this helps :)


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 7 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: chrisexv6, jennsnoopy and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  


TroubleFreePool.com The Web