motor

I have a Vgreen Variable Speed motor model EVQ165. Every third or so day the motor turns on (green solid light) but does NOT start running. Slight clicking noise and nothing. No fault light indication. Then, the other couple days, it turns on, starts running and primes then no air out of...

I currently have this pump (or motor??) that started going bad last summer (pics attached). I know nothing about what I need, but I have been reading about variable speed pumps. My electric bills do get quite high in the summer while using this one, even though I only run it about 10 hours per...

Hi - I’m trying to determine if this can be repaired or if I should replace? Original problem: humming when pump comes on. Checked capacitor, it’s fine. Diffuser not clogged. Impeller seems to be stopping and not rotating completely? Removed motor from seal plate and there seems to be a...

I am looking to replace my single speed Super II pump with a variable speed pump. I am considering the TriStar VS 900 which has a 1.85HP motor. I am trying to understand how easy/expensive this pump would be to service down the road. The parts diagram from Hayward lists a motor (part...

Pool build finished spring 2014 so 9 years old now. In ground, vinyl liner, cartridge filter, with Jandy PHPM 2.0 pump for 33k gallons. Opened yesterday and pump is working but very loud. Pool place said they’ll replace motor and seal for $850. Looking to find out if that’s a reasonable...

Hello everyone, I've decided to open the pool on my own this year. Last year, the maintenance professional I hired detached the pool pump motor, and now I'm a bit uncertain about where to reattach a few parts. The model of the motor is C48K2N143B3. It's part of a 25,000-gallon vinyl pool setup...

Howdy all, I'm looking for options on replacing a pool pump. My pump motor started making a squealing noise last Friday (only when running higher RPM). I figured the bearing was going out and was going to schedule service after the New Year (pool company was closed for the holiday). It...

I have a Harward SP2300VSP MAXFLO VS pump that I purchased a few years back. It's making noise during regular operation and after checking the impeller etc. have come to the conclusion that the bearings are the cause. Searching online there isn't much documentation on replacing these bearings...

I have a MaxFlo on my solar panels heating system. For different reasons, the solar system uses a separate plumbing system than the main one, handled by a different pump. The pump is activated automatically by the solar control system, whenever it makes sense based on air/water temperature...

Dolphin S300i motor assembly - external