hayward aquarite

  1. black_vanilla

    Aquarite S3 not communicating with pump

    I have an Aquarite S3 panel controlling pump, lights and SWG. THE SWG and lights I can control from the Omnilogic App just fin. However, the Hayward VS 900 is not responding to any inputs from the main control panel or the App. It works just fine when I program it from the pumps control panel...
  2. J

    Hayward Aqua Rite - "Err2" displayed with 4 lower right LEDs flashing red

    Last week my Hayward Goldline Aqua-Rite for TCell-15 unit was not displaying anything and all LEDs were off, so I reset the generator by power cycling at the electrical panel and the generator went from a blank screen with no illuminated lights to one that displayed "Err2" with 4 lower right...
  3. L

    AquaRite controller does not remember the T cell setting

    I have an old AquaRite w/ a brand new T-3 cell. When I use the diagnostic button to set the cell type from the default T-15 to T-3 it only remembers it as long as the pump timer is on. As soon as the pump timer shuts off it forgets the T-3 and the next morning it will be back to T-15 again. Is...
  4. J

    AquaRite - sudden 0 ppm reading

    Our AquaRite system was working fine on Saturday (reading 3200 ppm). On Monday, salt level read 200 ppm with the check salt and inspect cell lights illuminated. Since, it has been reading 0 ppm with both lights illuminated. No chlorine is being generated. I tried a reset with no luck. The cell...
  5. S

    OmniHub/App and AquaRite Diagnostics

    I connected my Aquarite to my OmniHub the other day via the daughter board just like in this thread. The OmniHub is communicating with the AquaRite to produce chlorine. I tested it over night and the chlorine level increased as expected per a FAS/DPD test. Also, the scheduling seems to work...
  6. J

    Hayward Aqua Rite Salt Cel - Need Help

    About a month ago noticed the lights on the Aqua Rite said to check cell. The cell was caked so I did the acid/water clean and put it back. The cell has never worked since (it's only 2-years old fwiw). Instead of troubleshooting, I bought a new cell and installed it. Seems fine for the first...
  7. Palpatine

    Okay, I'm researched out... which SWCG should I get?

    Hi All, I've been trying to figure out which SWCG to buy but seems there are a million different "good" choices. All my pool equipment is Hayward, except for my heater, and I can't seem to figure out what the difference between these Hayward systems is (other than price): Hayward W3AQR15...