Search results

Thanks for the suggestion. I tried completely removing all power (verified with a hot stick) at the breaker, so no current running at all. After a restart, no lights flash/flicker. This was after replacing with a 3.0A fuse. The actuators have not cycled at all for months, so not sure if they are...

Yes, I have tried switching off the power at both the circuit breaker as well as the adjacent disconnect switch, no luck on the hard reset. The fuse idea is interesting. Any idea where I could find a fuse on the Jandy RS mainboard? UPDATE: Fuse is located right next to 24V, I checked the...

Hi all, I had a Jandy Aqualink RS upgrade kit installed a few months ago to get WiFi pool control. It's been working like a charm until 2 weeks ago, and now no response on the panel to any button presses. Any idea if there is a way to reset the controller? I checked, its receiving 24VAC no...

I've been setting TA to 100 as per pool shop, so that was mistake #1. It will drift lower to 90 with the next rainfall, so mother nature should take care of that one for me. Good to know my muriatic consumption is not crazy. I only needed ~ 3-6oz / 2 days when using cal-hypo, so the 4x increase...

I've been adding 3" pucks to get my CYA up from 20ppm. Rain in Texas took my high CYA from 80 -> 20 just through dilution in Spring. No water bill to fix that :-) Should I stop adding the pucks now that CYA 30ppm?

I have cut all ties with my pool shop after getting a ton of misleading advice (& unnecessary products!) from my pool shop. Pool shop suggested I use CYA-free shock, as I had 100ppm CYA. I now have high CH with all the cal hypo I've thrown in. I've switched to the TFPC method & I seem to be...