Search results

Well, tha light has been used two seasons now and still is working. My pool has a surface of 290 ft2 and the light is beutiful all aver the pool.

I added sikalite to the concrete when we poured the bottom and walls. Then applied 4 layers of morter whit sika 1 according to its instructions. Finally the tile was installed with an adhesive from kolorines made to be permanent submerged, this same adhesive was used for the grout. Here is a...

Some results so far: I lost 1/2" daily in an ambient temperature up to 100° C, water is at 86° C. I´ve used 7 pucks (3 left to reach 40 ppm CYA) and 3 galons of 6% bleach in 16 days. Working on lowering TA from 200 (not hurry) to add borates. Filter working at 7 Lb/In2. 2.5 hr/day. Whit the...

jasonlmarsh, Here are two pictures whit the surface moving and still, there is no slippery to walk on. spillmar, The tile was on paper, not mesh, after 30, 40 minutes from install it, you wet the paper with a sponge several times in 5 minutes to soften the glue then clear the paper. Thank...

wetone456, Here is a pic of the chimey.

wetone, I'll take and post a close up of the firepit, it is not finished yet, but the grill is ready, and of course, was used yesterday. Gumaro

Lershac, Sure is a wonderfull day, tell me if this smile worth the effort.

Thanks for you words Samantha, Lershac. Here are somo pictures:

I calculate 45 hrs to fill the pool, so last evening I started to fill in order to be ready on Saturday noon. :-D :party:

Rwhite692, I do have exactly the light showed in the link, but I have not installed it yet. I have tested it in a room at night and it makes fantastic light shows. About it performance over time, no idea yet.

Just for the record, The house was delivered last weekend. I've already mounted the filter and its conexions, so....... Next saturday the pool should be filled :party: :party: :whoot: :whoot: Gumaro

No problem, we all (the crew, DW and I) are desperate now, it seems to be next month when they leave the house. Then fill and enjoy it asap. Gumaro

Hi everyone, Long story short. The pool is in my second house, that has been rented since three years ago. It was suppossed to be leaved last December, but was no possible. They give me permission to build the pool in the backyard (they dont use it, they are persons from other state who are...

I've made some calculations for my pool from information found here in deep end and the result is 0.16 ppm FC per hour per bather for a 6.8k gallon pool. I've not verified it (my pool is not ready to be filled yet). With this number I calculate 2.69 ppm of FC for 13 bather, 4 hours for 21k pool.

Hi everyone, The tile are ready :party: :party: :party: Altougth I'm not ready yet to fill the pool, Alex (Hurricane) thinks different and filled a half of the pool, 25.6 inches of water in three days. Anyway, as I used the pool pump to take out the water, it was usefull to calculate the...

one more picture...

Thanks for your comments whoozer, Shane1 and beaumatt. I started the tile work last weekend, too optimistic to finish in one weekend, it will take two. orthofish, mkenion2, yes the cost is low, 4.6K, including the TFtestkit and maintenance kit. The only things remaining to buy is a led light...