Search results

Same problem with my iPhone. Set to Region Sweden I enter 7,2 for pH, gets stored as 72. Changing to Region US and entering 7.2 seems to work, but I need the phone set to correct region and it is a pain to switch each time I want to log a test result. Please fix, it used to work in a previous...

Glad you like it. Don`t think Imade a build thread but there are plenty of pics in various threads if you search my name. Best of luck!

Hi Chi-Chi, After six years, still looks great. I had to replace the liner after three years due to a rip caused by severe winter, where lots of snow came down from the roof onto uncovered pool with ice... Liner replacement was easy, only had to remove the boards inside the deck edge covering...

Seems the decimal bug has crept back in at some point. I can no longer enter decimal values with a comma, e.g. pH of 7,5 is interpreted as 75. This is on ios 13.4.1, app version 333 (3440)

Here they are again, there seems to be recurring interest for these measurements.

I have cut several holes in several pools, both above and below the water level. It is scary buth really quite simple. I usually glue a patch of vinyl on the outside, use a marker to draw the outline of the whole and then cut with a scalpell or razor blade with steady hand. If cutting below the...

I mounted my skimmer as high as possible. Works great, no water loss. I have a T for two reasons: reduce risk of pump sucking air if water level gets low, and if I want to run the heater when the cover is on.

Or get a new liner from Intex

Intex decking 12x24

Fill to just below skimmer position. Make sure to fit the skimmer high enough that you don't lose any depth. Mount the skimmer without gasket but do not tighten the screws. Cut the liner inside the skimmer. Remove skimmer, install gasket and reinstall skimmer. Tighten the screws. Alternatively...

All the measurements you need

I have two pumps, in parallell. In addition to increased flow and filtration, I have one running through the heater, the other runs my Intex pool cleaner. Indepentent, remote power switching for each pump. Works great.

Love my Intex cleaner. Best value for money of all household items in the house.

Because it is much easier and less nerv wrecking to cut the liner after the install than before.

Sorry, but you will have to drain, install pavers and level. Bite the bullet and get it done.

Panty hose works as well

No need to plug the holes. The more holes, the better the flow. I installed skimmer in parallell with one intake. Added a second return and hooked up a separate pump used to drive the cleaning robot.

Just replaced the liner on my 12x24 Intex Ultra Frame after a tough winter. Re-installet my widemouth skimmer using the same approach as the first time: 1. Cut the butterfly gasket in two, use one half inside pool, the other outside 2. Position the skimmer frame between two legs where there is...