Search results

Thanks. I just plugged the ribbon female end in randomly and put it back together and tried it today. It worked but the red quick clean light doesn't come on and pushing the button for the full cycle clean does nothing either as far as I can tell. The yellow light doesnt come at least. Could the...

I disassembled my power unit because the cord connection was loose and it has to be tightened with the plastic nut that is threaded on the inside of the unit. When I pulled apart the case the thin ribbon strip that connects the quick clean red light and full cycle button with yellow light to the...

I bought the house last spring so this was my first winter. I have a large tarp covering the entire system. Filter, pump, SWG, etc. But based on the condition the old pump was in when I disconnected it, (heavily corroded) I plan on taking the motor off each winter. It's not that big a deal...

Thanks. I was leaning in the direction of sticking with a single speed due to the other added cost factor of also having to put in a new timer. I ran the pump 4 hours a day last summer, but was thinking about maybe going down to 3. Is that to low? What is the life expectancy of a single speed...

Around 7.5-8 cents per Kwh.

Sorry to get back to the conversation late. Been busy. On the motor it says Volts 230/115 , Hz 60, HP 1, S.F. 1.40 I live in Northwest Ohio and only ran my pump from June-August last year, with maybe half of September before closing up shop. So I guess my issue is: based on the extra cost of a...

Would this require any different wiring from what was already set up for the original pump?

I bought a house last year with an in ground salt system pool approx 26000 gallons. At the end of the year the pump was getting really hot and sounded like the bearings were shot. I just got around to taking the pump motor off and it is toast. It was a Emerson EB128 56 J-Frame C-Flange Single...

I did a sock with the CYA. I think my initial CYA level may have been off a little, so I was going from 0 when it was actually higher. But since I have a SWG I'll need it at around 70ppm so at least I dont have as far to raise now. My FC was 24 which is dead on for a CYA at 60 which it was when...

I am using pool math. I was at 0 for CYA when I opened the pool and accidently over shot my goal of 30. At my closer to 50 CYA it is calling for a shock FC of 20. So basically, I need to just keep adding the drops. I had stopped thinking I was missing something after 15 drops. And I can...

SO I started a SLAM this morning after opening pool and noticing my water starting to turn green. I have a SWG 26700 gal. pH-7.2, TA-80, CYA 50-60, Using my Taylor 2006 I cant get the water to go from pink to colorless. At the 25ml test after 15 drops its still dark red. Same thing at the...