Search results

Having trouble getting CYA up. Only at 35 after adding 5 pounds. Adding 10% chlorine by the gallon daily but without the cya, I am losing most of the chloride. Back down to 1 ppm this morning again. Have not been over 2 since we put water in the pool last week. This morning's readings" FC 1...

Need to pick up Muratic Acid to make that adjustment. Working toward the other recommendations. Is every 6 hours the right time to check? I have the CYA in a shirt at the skimmer, so how long will it take to see that level rise?

I did my testing this morning and I believe these are my results FC = 1.8 ppm pH = 7.8 TA = 100 CH = 90 CYA <30

I bought the K-2006 testing kit.

I have been running through the website for the summer and our pool is now in place. Water is in a equipment is installed. What comes next? Do I start with FC and try to get that right? I had FC=0 and pH = 8. Are there other numbers I need to worry about on day one? Thanks in advance.

Problem was resolved by lifting the blocks at several point to bring the track up to the wall. In most cases, there were a couple in a row that were 1/8-1/4" lower than those around them. They were in areas where water runoff was an issue in the storm.

We are installing a diamond star 18*33 pool. The track seems to be rising slightly in a couple of areas causing a small gap of <1/2"between the bottom of the wall and the track bottom. Our manufacturers instructions indicate that a 1/2" +/- in the concrete pavers is OK, but now we are...