Search results

You can always drill an 1/8 inch hole in the shut off plate of the valve. I have heard that done many of times. You will end up cooling your pool at night with it running 24/7

Yes you can remove it and measure the opening, then order a new gate which will mount to the existing poles. The only difference in, "line" vs "end" poles are the cutouts for the railing to slide into.

I used ressolar.com Shipped to my door, 10 year warranty. New AquaTherm panels

Bringing up a old thread, however i am thinking about doing this. It's been three years on one side, might be time to flip. I cant see how it would hurt

if there is antifreeze in the lines and he blew them out, as long as water did not reenter then screw it back in

Also my 10ft fiberglass roman stairs were 9'11-1/4. I had to make up 3/4 inch just to make the stairs fit. The coping they sold me did not work with the stairs, after 2 weeks of arguing they sent me a different style. Sent from my SM-N910V using Tapatalk

Sounds like my experience with them. I started nit picking every little thing and made them reship everything based on how bad there customer service was. I swear they started ignoring my calls. My 90 degree corners were 80 at best and I had to take apart the rivets just to complete the job...

Start reading Bill! Head right to the pool school section and get to slaming Sent from my SM-N910V using Tapatalk

I would use some lube. Sent from my SM-N910V using Tapatalk

I did my own 18x36, 650 yards of dirt and 1 yr 3 months later it's complete. The saving's is unreal. Anything is possible with youtube and books! Sent from my SM-N910V using Tapatalk

I just cleaned up my cloudy water in a day and a half. Find out your cya level and use the chart to see your shock level. use the calculator and add the necessary amount of bleach. PH aroun 7.2 works best. maintain that shock level until you pass the overnight chlorine loss test. It really...

my walmart had it priced 3.64 but rang up 2.50. Hudson NH

Select the color and hit the back button, should start clicking right after Sent from my SM-N910V using Tapatalk

Take it slow. On for a few. Off for a few hours. I did it with a 26k Sent from my SM-N910V using Tapatalk

New AquaTherm panels Sent from my SM-N910V using Tapatalk

Open for a month in southern New Hampshire. We have been swimming three days now, 78,78 and 82 on those days. Solar and heatpump. Combined I paid 18 bucks for electricity. Love solar! Sent from my SM-N910V using Tapatalk

Please have a open mind because you are about to get good advise from the members. You need to slam, period. Weekly algecide is not needed in a properly kept pool and this site only recommends it 1 maybe 2 times a year and it's only poly 60. Your test strips are inaccurate and you have been...

Aquabond Sent from my SM-N910V using Tapatalk

Direct burial is good for solar. I am down in brookline and just built my whole pool entirely by my self, 18x36 roman end. I also installed my solar panels, if I did it again I would use foam insulation(pipe insulation) underground. You will have people say it's not needed but for the few...

Well all I can say is It worked for me. I see your side of it too Sent from my SM-N910V using Tapatalk

I used regular pvc glue. Marine epoxy will work to but my way gets it into the cracks way down inside Sent from my SM-N910V using Tapatalk

I just fixed a issue similar to yours. I blew out the line first and then added suction with my shop vac. Once under suction I laid on the glue to the outside of the pipe and it worked beautifully Sent from my SM-N910V using Tapatalk

Mine leaves the pump pad, travels 100ft to the house and 35 ft up then 100 ft to pad and 15 to the pool. Works great

What he said. In most cases they run a #8 green ground in addition to what the regular cord has, this green wire is attached to the light niche and aquabond is used around the connector to prevent from rusting,scaling so that there is always a good ground for many years Sent from my SM-N910V...

The electrician used aquabond on my pool last year Sent from my SM-N910V using Tapatalk

From what I read the pool heat pumps really need a temperature of 60 or higher to really give you good results. There was a chart on here once that showed the outside air temp vs btu's produced. With 60 degree temp you will not be getting the full potential. It will take 80 degree outside...

Why wouldn't any landscape low voltage transformer work. Plug it directly into your gfci and your good to go. Pool landscape lights and landscape lights are the same. You can get a 300 watt transformer and photo cell for the same price of the px300. If you cut the plug off you should be able...

11 months or so Sent from my SM-N910V using Tapatalk

Sorry about being upside down Sent from my SM-N910V using Tapatalk

Ask them why the difference. Sent from my SM-N910V using Tapatalk