Search results

I have a low profile 6 port A&A and my spa has 4 pop ups, but only 3 pop up. I've run the system for years (not original owner) and known this, but not sure how i could try and fix it. I've taken the popup out and tried to dig around in the hole to see if it was clogged but only some calcium...

its probably time to replace a pool light. an LED bought in 2012 seems to have failed and ive been dreading this day. i have 2 pool, 1 spa on different outlets but in sync via intellitouch controls. so i wanted to either a) replace all fixtures and go with a standard LED bulb, or buy a single...

i have popups and i think the one in the middle of my spa is clogged. i'm not sure how to get it fixed, i pulled the popup and it had a lot of calcium so i cleaned it but its still not working and no water is coming out. any ideas?

Has anyone successfully adjusted their swg flow switch to allow lower rpm? mine used to work at 1700, then 1900, now i'm at 2500 rpm just to keep the swg on. i cleaned it this weekend and while its still got a little build up, i'm wondering if its possible to adjust the flow switch by bending...

I have 3 lights in my pool, 1 in the spa and 2 in the pool. One in the pool is not working, but the other 2 are. I checked the relay and it clicks and the working bulbs change colors. I pulled out the bad bulb and it says series 60100X. I couldn't find a wiring junction box where this might...

I have a used Tiger Shark Plus Model 9955gr which worked great last year, but when I threw it in the pool this week it didn't run. The psu light comes on, but I get no dc voltage on the 4 pin output. I ordered a new psu on amazon, it came today, light turns on, and in the bath tum the robot...

I have 2x pool and 1x spa lights (led intellilogic). One of the pool lights never syncs and is usually dim for 5-10 minutes before it starts turning on bright. Once its bright, i can sync or change colors and it will start working like the other two. Is there a fix for this?

I'm trying to purchase screenlogic but the parts I see include the remote and rs232 module for outside?. Do I have to replace my existing outdoor module to use screenlogic? Any help on parts I need?

I'm in the north Phoenix area, and I have a large patio/pool area with Turkish travertine pavers. It appears the ground wasn't set properly and they are all wobbly and uneven. The grade appears to dump into a puddle in the middle of the patio instead of out to the sides. I've kind of been...

I don't see it talked about much here so I thought I'd ask. Why don't more readers buy their robots on CL? I have an appt today to get a tiger shark plus 2014 model for $350. I figured that was a pretty good deal. I've found a dolphin diagnostic for 500, and a few others for around that...

why do we have 3 basic new user forums? just getting started, tfpc method, and testing and balancing your water seem to have exactly the same type of posts? also, is it possible to get a buy/sell/trade forum? Too hard to manage? I'm not new to forums so if you explain why you chose this...

The water in the Olympic diving pool turned green and nobody knows why Pool store got Rio!

purchased a home and the pool looks to be a mess. gonna track it here instead of the swg forum. a refill isn't an option as the cost of water is outrageous here. maybe in the winter or something. tc - 2 to 3 ph - 8.2+ ch - 650-850 (water never turned totally blue at 34 drops) ta - 200 cya -...

I have a pool that was built in 2013 that came with ic40 and automation. ive been told by the pool company maintaining it that they are using tablets because the salt cell isnt working. i havent fully tested the water yet, but i know in 2 weeks i've had to clean the cell twice due to build...

Does anyone have hints on how to make the pentair automation run a VS pump at different speeds for different times of the day? I'd like to set the pool on like Pool as 1500rpm for 6 hours and then Pool high as 3k rpm for 2 hours. I'm not finding the pentair as easy to manage as the jandy.

Raypak 2100, the old big green heater with what looks like a robertshaw ignition. I tried to warm the spa yesterday and it didn't get warm, so i checked and I could hear/smell gas but the thing wasn't hot. Where should I start checking?

Reading the manual the aquarite controller has 4 lugs for power, and in 240V you should use 1 and 4 for your load lines, and a jumper between 2-3. Can someone tell me what this jumper looks like? I purchased a used system and I'm only seeing the 4 screws, and 2 pieces of metal backing behind...

since the topic is locked.... does anyone have leads on buying the old style drain covers? i hate these new covers, my spa looks terrible with dirt and vacuuming it by hand is a pain. it looked great until i changed the drain covers.

I need some assistance in low CH. I was testing about 200 after a 50% drain of my pool. Went to the pool store and asked for CH+ or calcium +. They gave me 4lbs of some stuff, I can't remember the name, in blue bucket. I've looked at pool math and googled calcium chloride but can't seem to...

I see the model plc1400 but it doesn't appear to have the module for chlorine control? Do I need the apure1400 even though I already have aqualink iq900-rs?

One thing that bothers me is how people run their pumps 4 to 8 hours a day and at night only. But I don't follow how chlorine loss during the day could survive without turn over? If you run only at night your water is stagnant all day and wouldn't the top few feet have fc0? And if you run it...

Does anyone leave a robot in 24/7? I have a net over my pool and don't want to take the cleaner out constantly. I have a pressure side that stays in and I just reach through the net to change the bag when it needs it. I am looking to upgrade to a robot.

i want to replace my de filter with sand because of the annoyance of DE and backwashing having to replace it. i have a pentair 60sqft de filter today, any suggestion on a comparable sand filter? i prefer pentair and they have a few to choose from.

Looking for some guidance on some simple questions. Pool: 13k, plaster, 4 feet deep play pool with attached spa. Equipment: Jandy Aqualink system with Pentair 60sqft DE, Pentair Intelliflow, 399btu gas heater, 1/2hp booster pump for polaris 280. Location: Dallas Tx FC:7 CC: .5 TA: 70 PH: 7.2...

Let me tell you of my pool and then ask my questions :) 12,000 gallon in ground pool, kidney shape with a small 2-3 foot rock waterfall feature. 5 feet deep at the max, probably 4'6". The pool is almost all the same depth, and has a 1,000 gallon round spa attached with overflow into pool...