Search results

That seems to be a part number for a 5 pack. I found 9995807-ASSY for the single QTY. And 9991279 for the connector. I have the crimpers to do the open barrel crimps, so it would be about $55. I might just wait to see if anything else goes wrong before replacing it as all it currently well with...

I figured out the problem was the swivel so I took it apart. One of the spring loaded pins wasn't returning as high as it should. After messing with it there was no improvement, so I cut a U shaped washer out of aluminum to slip over the other end and space the contacts closer together. Back in...

Yep, the problem is the cable!

It's not doing anything. At all. The power supply appears to function as normal (assuming the output is good) but the robot is motionless. No noise or movement. As far as the warranty, I bought it about 3 years ago. I bought it off amazon which I believe means they will not honor a warranty.

My cleaner worked fine one day and not a few days later. I tested the power supply with a multi meter and it appeared to be reading about 28 volts. So there is power of some sort getting through but I believe this does not guarantee that the power supply is good. How can I do some...

Wooo, it was the shaft seal. The I thought the impeller would be pressed on, but it turns out it is screwed on even though there are no fittings to hold the impeller or shaft. That took a while to figure out.

Something else, I just noticed if I bump the pump up to max speed, then back down to the 1900rpm that it runs at all day, the noise will be gone (for the time being). I'm going to order a shaft seal and try that.

I have a hayward pump that's a little over a year old. After being on for a few hours it will make a really high pitched whine. Is it possible it's the shaft seal or is it bearing for sure? Does anyone know what size bearings it uses so I can find something without taking it apart? Only the...

I had it tested a few times by different people at the pool store, same with the alkalinity. Strips AND reagents. Unless the shocking or asorbic acid could have brought it down, I did have it tested after that though as well. I know that my chlorine testing is good because when testing after...

I was at 5ppm last night, 5ppm when I checked it this morning. Now a few hours later it had dropped to 2. CYA is 45 I completed a slam several days ago because of overnight chlorine loss (no sign of algae and water looked great though). My water temp was very high, about 94, and the slam took I...

Got up to 96 a week or two ago, wanted to have it that high because of how awesome it is at night. Once summer is in full swing going to have to keep it lower.

Here's where I get it. It's 4.4lbs, usually 28 bucks (still cheap) on sale for 21. Free shipping 2000g 4 4lb Vitamin C Powder Ascorbic Acid Wrinkle Anti Aging Antioxidant | eBay

How many suction lines?

Have you thought about leveling the bond beam?

you arent going to save any money on heating costs by trying to keep the up to temp

Yeah I got it. Haven't gotten much of a chance to see how it works though as its been rainly and the cover is on the pool. From a quick glance under the cover it looks like it works well though. One thing I noticed is it seems to spend most of it's time on the walls. I have a concrete pool lined...

Doesn't hurt to put them on "early", the lows here have been less than 50 with the highs in the low 70's. Even with some cloudy days here and there my pool is 84.

If you put a one way valve on each pump, you could have two on the same line. Then have the filter pump run at a different time than the sheer pump. Or just use one pump with a valve and have them running off the filter pump, but I think theres a chance that wouldn't flow enough water.

Still don't have it, knew I should have done the amazon prime shipping

Even electrical? Anyways since you can do all that other stuff I think you could do the waterfall too. There are some good tutorials on youtube and you could make a huge multi tiered one with all that extra dirt.

You might want to make sure you can do the plumbing and electrical without being a licensed contractor, since you are pulling permits.

After I posted that I saw in a review that someone didn't have trouble with the warranty after buying from amazon, I want it asap so I was willing to pay the extra six bucks for Tuesday delivery. But then I got to check out and realized I was going to have to pay over $50 in tax! So I ended up...

Do you know if you get the warranty if ordering direct from amazon? As in the Amazon prime version?

80 yesterday afternoon, 77 this morning. Still not bad considering the temperature highs around 70 and lows around 50.

Going to order mine today, should have it tuesday.

Most of those charts are for 0.5in water column pressure drop, where as most appliances can run down to 4.5-5 in water column. Which would be 2-2.5 pressure drop for standard 1/4psi gas lines

Please post your experience. I'm very interested in getting one of those soon, the weekly timer function interests me the most.

Well they use pex for radiant heating so you could use that, but I believe the ground temperature is much colder than that so heating would not be so effective. You can just use a fountain for cooling Amazon.com : Splash Pools 30700 Waterfall Pool Fountain : Swimming Pool Pump Accessories ...

I've had an on and off mustard algae problem for a month. I didn't shock for a long enough period I think, but another problem I noticed is some of the bubbles in my cover are popped, and they are filled with yellow water. It's just a few here and there, looks like the holes got there from...

Bummmp