Search results

Our polaris 65 is squirting out 3 holes instead 2. It is sitting idle in the pool. We have done all that was listed above in the posts. Any other suggestions?

We are going to drain the pool down and patch the liner. Repair the wall best we can. I really like your idea Bones, we will check will our tire shop. No this won't be pretty but it is cheaper than replacing the panel. You should have seen the water pouring/shooting out of the hole, OMG. I...

Unfortunately it is in the middle of the wall. Thanks for your advice. Yes the my child is still alive, but barely!!!

My son just shot his bow and arrow and it hit the swimming pool. When through the pool and into the liner. Any suggestions on how to repair the hole in the panel, other than replacing it.

Yes, definitely figure out how she is getting up there. I would not want anything to happen to her.

I have been working with my Polaris 65 also. I have adjusted the relief valve and cleaned the small filter inside of the white tube. It seems to be working as of right now. This is what I will try the next time I take it apart. Clean the outside of the white randomizer tube and the inside...

Our soil gave way and caused the base on the sand filter to break. We have not been able to locate a base to fit it. Any suggestions would be greatly appreciated. Style # AT3125B

Wow, I love your pool and the view you have is amazing. How is your baby doing?

YEAH!!!!! Our pool is almost 100% back to normal. We put the DE in the sand filter and put a nylon sock on our skimmer. Within hours our pool starting coming to life!!!! This morning when we swept the pool there was no algea that came floating off the bottom. The only question I have...

Yes I know I did the overnight test correctly last night, but I am going to do the test again tonight. I will add the DE to my sand filter per the instructions on this board. If my overnight test does not change or I don't lose more than 1 ppm. what levels should I let my FC go to. I fear...

I hope these pictures come thru okay, I had to compress them because they were to large.

. Did you do an overnight test? Yes and FC is holding, it was 20 last night and 20 this morning 2. Have you had your fill water tested for metals? no 3. Can you post a pic of your water? I will 4. Have you added anything containing copper? not that I know of, I only use what the pool...

2. In your detailed backwash procedure, you do not mention turning off the pump before switching functions.....do you? Yes I do, I forgot to mention that. 3. Why do you backwash with no indication from the guage? (no pressure rise) Unless your guage goes 6-8 lbs above normal ("normal" seems...

I am not going to back off. I want my pool back :party: . I was just curious as to how my pool got in this condition with the cc at 0-0.5. Thanks for your input.

I forgot one more questions. When my pump is on low, it is on LLLOOOOOWWWW. Is this normal? It has been like this since it was new.

Okay I now have my FC at 20 and holding, but my CC are 0, they range from 0 to .5. In fact my CC have never been above .5. Why is my pool now Turquoise!!!! I very frustrated. I would think that my CC would be higher than that to have a pool looking like my does? Can someone explain this to...

We seem to never be able to keep a pressure gauge for very long, they seem to all sit at 0 and we get a new one and they work for awhile then go to 0. I went to the pool store today, got a replacement. On low my pressure reads 5, on high it reads 15. Should it read the same at both high and...

Thank you. Will do!!!

My pool really never totally went clear. I did the overnight test and the results showed no loss of FC. Today my pool is very cloudy. I tested my water last night and this morning. Nothing much has changed. Here are my results this morning: TC: 4 CC: .5 PH: 7.5 TA: 240 (has always been...

I am using the TF-100 kit. My CH is 60, according to the Basic Pool Chemistry: In a vinyl lined pool there is no need for calcium. From that information I would say I am okay with 60. although the pool calculator says I need to add 506 oz. of calcium chloride. What should I do?

yes, it has a low and a high, we keep it on high

Our pump is on a timer, it comes on at 12 noon and goes off at 9:00p.m.

WOW, we have had a great summer with our pool, unlike previous years with the pool store. But... now my water is turning cloudy. Here are my numbers: FC: 4 CC: 0 TC: 4 PH: 7.8 T/A: 240 CYA: 47 Temp: 83 We have always had high PH and T/A, we add the chemicals needed by the pool calculater...

I just received my TF100 test kit and here are my readings: PH: 7.8 FC: 9 CC: 1 CL: 5 TA: 400 CYA: 25 The pool calculator did not indicate that I needed to do anything. But it shows my TA should be 100-120, mine is 400 and yet it did not tell me to do anything. Just wanted you expertise...