Search results

  1. B

    pump replacement and plumbing advice

    Hi. I have two 2hp Whisperflo pumps that are on their way out and some ~20 year old PVC that probably needs some attention. The automatic controller simply turns them on for two minutes a day, and we turn them on through the iAqualink about 10x/year for an hour each. I need advice on two...
  2. B

    Is this the lighting junction?

    The intermatic junction box broke. I want to fix it. I was thinking the job would be straightforward (and it still is, I guess) but: 1) does this appear to be a junction box for the pool light? 2) what's the blue wire? It goes in the first conduit and the third conduit but it's unbroken. I...
  3. B

    Lost a foot of water, no prime

    Ok. This is actually about my fountain, which is plumbed just like a pool. It's 6*8ish, about 3' deep, 1.5" PVC, has a Whisperflo pump and a brominator etc etc. Pump is 30 feet away and 8 feet above the fountain. It has always had a small problem pulling or holding prime; sometimes (before I...
  4. B

    Pressure after the filter

    After two years of neglect, I have diagnosed and repaired my infloor system. Unfortunately it won't turn on due to inadequate pressure. The gauge shows 8psi and it needs 14-20 per the manual. I am getting ~28psi at the (clean) filter. The pool was installed (by the previous owner) by the...
  5. B

    How would you repipe this?

    Hi. I bought a Superflo VS to replace my Whisperflo and in my haste I did not notice that the connections were different on the two models. "No problem," I thought. "I will just order a new union of the same make and mate half of the old union to half of the new union after gluing in the slip...
  6. B

    Please recommend a fountain pump

    Hi. I have a fountain and I am considering a new pump as the old pump is probably pretty inefficient and electricity rates are now in the high 20s per kWh. Considerations: 1. Existing pump is 1/2 HP. 2. Pump is ~6 feet above the water level in the fountain. 3. Presently have a small suction...
  7. B

    How "watertight" and "airtight" are properly installed PVC ball valves?

    How "watertight" and "airtight" are properly installed PVC ball valves? I have what I think is a suction-side leak on my fountain circuit. Since we have owned the house, the pump would never self-prime (maybe that's to be expected as the pump sits 6-8 feet above the water level), but now it...
  8. B

    Soil erosion outside gunite in-ground pool

    Hi. My wife noticed that the grass around our inground pool was starting to fall. We have owned the home and the pool for a little over a year. It "works" fine, and sits way, way above the water table. So I took out the shovel and did some digging and I have established that there are a number...