Search results

FIXED! Took Pool Clown's advice, and updated the protocol adapter, even though it was already the latest version. Now everything works as it did before.

Thanks for the replies. The adapter is the latest version, updated by a few months ago. Worked fine after that. Since the ios app works fine, I don't think anything is wrong with the adapter or the wireless. In the PC, I see the IP address of the controller, and I can access the "configure...

Able to connect, but blank screen. Works fine on the phone, so it's not the controller or the wireless. I suspect it's related to the latest Windows 10 update. I could undo the update, but I'd like to hear if others are having the same problem or if there is another solution.

Good point. I have 6 panels, so that would indicate 27 gpm, and at 2000 rpm I'm getting appx 25 gpm with the solar open, so not enough. 2500 would provide 30 gpm, so I'll use that. Is it correct to say that the vacuum valve is set close to this minimal flow, so if I achieve minimal flow, I...

Hello all, I have an easytouch controller with an intelliflo vs pump. I keep the pump on for 16 hours a day at 1000 rpm, and it takes about 3000 rpm for a minute or two to get all the bubbles out once the solar valve opens. then, I can slow it down to 2000 rpm and it keeps going with no problem...

After getting my first bill (over 500, but includes A/C and water heating, and only using the pool a couple of times) I used my gas meter to find out how much gas the heater was using per hour, and calculated that for heating the pool for use only on weekends, the bill would exceed $500 a month...

Richard I see you're in San Dimas, do,you have any recommendations for an installer?

I have solar panels... They make little difference in winter, even on sunny days. I haven't owned this house in summer yet, they probably work quite well then, but then heating in summer is not the problem I'm trying to solve...

I noticed the ratings on heat pumps are all based on 80* air and 80* water... Are you running the heat pump continuously in winter?

Hello all, 20,000 gal pool in LA (near LAX) with Raypack 2100 heater. looking to swim year round, but the cost of heating is $500+/month for heating Thursday-Sunday, to 85*f. From my research it looks like a heat pump would pay for itself in savings after less than 2 years. We do use a cover at...