Pressure is now 14 on high and 2 or 3 on low. No wonder I could not get more than 5 on high and 0 on low the last 4 months. I had no idea they would screw up the most important thing, but I knew nothing about pools until a few weeks ago. They just kept saying pressure is different in all...
You're gonna love this one. I took the valve off and everything looks good, even the gasket. I started going over everything, hoses, etc., and found out when they installed my pool 4 months ago, they hooked the return up to the pump and the pump to the return. That is probably 99% of all of...
I am draining some water out and while it is on waste out, water is also going through the return. I have not changed the gasket yet, just figured I would start draining while I go up and get the gasket. Even though the gasket looks good, could this also be caused by a bad gasket?
FL- 8.5, CC -.5 - 1, TA-100, CH - 1000, CYA - 35. This is why I ask you guys. Looks like the CH is way out of line. I will correct this, change the gasket and go from there. Thanks again.
Yes, I shut the pump off and depress the handle all the way before changing positions. I just took the valve off and the spider gasket looks O.K. I did change the sand after converting from Baquacil to Chlorine but was careful when I cleaned it out and replaced the sand. I guess I could have...
A lot of sand comes out on the rinse cycle, not just a little. My FL was 6 and I increased it to 16 for the last few days since I thought it was my water and nothing changed. I just bought the pool, filter, etc. 3 months ago, but I guess the gaskets could be bad. Maybe tomm. I will replace...
My pool has been very clear since I switched from Baquacil to Chlorine a couple of weeks ago, until about 3 days ago. All at once my pool got cloudy. My FL, CC, CYA, and PH levels are good. Even though my pressure was only 6, I back washed anyway. On the rinse cycle not the backwash a lot of...
Changed sand yesterday and added CYA. FL 16.5 at 10:00pm last night and 16 at 6:30am this morning. CC's .5 this am and .5 now. CYA at 30 now. 7 psi. FL is 13 now and just raised to 17. Pool is not quite crystal clear but looks great. I want to thank everyone very much for their help with...
I just put the new gauge on and it is still at 7 psi. I think everything is O.K. It might drop more than 1 tonight because I am going to climb in and scrub every sq. inch again. I am glad I got the extra 870 and 871 from you because I ran out of the 871 last night. I am going to give it...
My PSI has not gone up 25%. Even though my filter is only 2 months old I bought another gauge and will put it on this afternoon to make sure the pressure is correct. It always stays between 6 and 8. Turn it off it goes to 0. Believe it or not can see the bottom clearly now and it only...
I just got in the pool and scrubbed everything. I did find a little bit underneath the bottom of the last two steps. I can just barley see the bottom now. The inside of the steps that fill up with water was most likely full of that mess and just took a while to get it out. I could e-mail the...
Water is getting clearer. Almost can see the bottom. My psi has not increased by 25% since the first day. Stays between 6 and 7. I backwashed this morning just to see if there was anything in it and there wasn't. I will not backwash anymore. I do have CYA ready.
I've tried everything to upload a picture but it says invalid image. I've taking other pictures and moved them to different folders also and same message. Last night at 11:30 I tested and it was holding at 15 and cc's were .5 (only 1 drop). 8:00 am it was at 6 and cc's the same .5. I will...
I added 45 minutes ago and just tested it and it is at 16.5. When I get back tonight I will recheck and I will take a pic in the A.M. I think things are going O.K. but I have sun from Sunrise to Sunset because I am on the beach, and that might be why it is cooking it up and is taking a while...
I think I will just keep at it and long as all of the local stores don't run out. 79 bottles so far. I can see the 4th step on the ladder now where I couldn't this morning so I think it made some progress today. Thanks for the help.
Even though the pool looks fairly good I cannot seem to pour it in fast enough in the daytime. I am putting in more an hour now than I did 5 days ago. I have no gook in the skimmer or when I backwash but I have put in 10 gallons in the last 2 1/2 hours. It is very hot and sunny today also...
Night before last it only dropped 1 ppm, thought I was there. then last night it dropped 7.5. I haven't seen any gook come out when I have backwashed and rinsed in 3 days. I still cannot see the bottom but the water looks good, only hazy. I have a Pool Rover Jr. and ran him about 4 hours...
Started at 6:pm yesterday. Brought it back to 15 each time. 6pm - 6, 7pm- 10, 8pm- 12, 9pm- 15, 10pm- 12, 11pm- 13, 6am- 8.5, 7am- 9.5, 9:30am- 15(didn't put any back in), 3:30pm- 1 (very sunny)
One jug at a time. It has never turned orange. It is real dark yellow now but I never added enough to make it orange to be on the safe side until I get the test kit.
42 hours since I started and no brown gook, 22 bottles of bleach, and a pretty green color. My test kit should be in today. The question I have is why did my pressure in my sandfilter never rise? It usually is at 5 and it never went above 8. I backwashed and rinsed several times and very...
I should receive the test kit from Dave tomm. I have put in 18 gallons of bleach so far since 2:00 pm yesterday. I have never let the test kit that I bought from Walmart that only goes to 5 get more than real yellow. I do not think that I've messed with the liner and hope not since I just...