Search results

  1. gablueliner

    Is my TA OK?

    This morning my level tested like this: TA 90 pH 7.6 FC 3.5 CH 100 CYA 40 Temp 74 My question...using the TFP app to do my logs, the LSI says my pool water is corrosive. If I adjust the TA to read 110 the LSI says it's all balanced. Should I raise my TA to 110? For several days I have been...
  2. gablueliner

    Massive downpour during SLAMing..now what?

    Right in the middle of SLAMing we got slammed with a huge downpour that added a good two inches of water to the pool. Do I need to start all over or just maintain my 16 FC level?
  3. gablueliner

    Should I run the Polaris while SLAMing?

    I'm in the process of SLAMing and there is no more green stuff in the pool. Everything is now just murky and there is dull grey sediment on the bottom of the pool. Should I be running my Polaris while SLAMing to keep the water churned up or should I let everything settle and vacuum?
  4. gablueliner

    First test with TF 100 test kit...

    I just completed my first test with the TF 100 test kit and the results are in. <Drum roll> Pool Temp 85; FC - 1.0; pH -8.2; TA - 100; CH - 90; CYA - 20. My pH is always high. Had some aquarium tested yesterday and the pH read 8.5 which is OK for salt water fish. That's what is coming out...
  5. gablueliner

    Intellibrite lighting question

    The pool builder installed an LED Intellibrite 5g light under the diving board. My pool is 20 x 40 (eight feet deep) The lens from the light is factory set to Wide Angle. The light illuminates the deep end really well but not the shallow end. The lens on the light can be set to Narrow Angle...
  6. gablueliner

    Out of Trichlor Tabs, can I just use bleach?

    My FC is a 1. Checked the bac pac and it was empty and I don't have a refil on hand. Is it safe to use bleach when I've been using Trichlor tabs? And can I go back to using Trichlor tabs after adding bleach? I know it's all chlorine, but still learning and not sure how it all works. Oh...
  7. gablueliner

    Ordered TF100 w/magnetic stirrer...tips???

    OK, so I ordered the much discussed TF 100 w/magnetic stirrer. Wondering if anyone has tips or suggestions on using this test kit. Is there a recommended order of testing? Do I need to do all the tests that the kit comes with if I have a vinyl pool?
  8. gablueliner

    Pool loves muriatic acid...

    Hello All. I'm a new pool owner. Most current test results: Watertemp 88; FC 2.0; pH 8.2; TA 100; CH not tested as I have a cheap test kit from the dreaded pool store; CYA by SWAG is in the 40's and I base this upon the last three BioGuard results that the pool store gave me (while selling me...