Search results

I'm probably going to have to end up buying a new one but I will wait and see.

Timer Humming

Ge 15132 timer, it is wired properly ive had it for about 7 years, I will check everything when I get home to make sure nothing is loose.

No its from the timer, I reset it so it wont activate, the pump wont turn on.

I turned the breaker on for my pool timer and it is humming loudly and the pump wont start, ive never heard the timer hum so loudly. Any help would be great!

You actually can get accurate results with the OTO test 1ml pool water and 4ml city water making sure you test the city water for FC before you do the test. My city water doesnt register FC when i test it. Might not be 100% accurate but it will give you a good idea. You could also do 1/10th...

I used the HTH in a sock infront of the return and 4 pounds was gone in less than an hour with a little massaging.

Do you prime the vacuum line before hooking it up? Try submersing the hose to get any air out of it first before hooking it up if you arent doing so first.

No problem

More like 18200 gallons 9000 is way off.

So this is the pump im looking at there are 2 versions standard plug and twist lock plug. 1 hp 3450 RPM, 115V Above Ground Pool Pump with Twist-Lock PLug- Waterway # PH1100-3 1 hp 3450 RPM, 115V Above Ground Pool Pump - Waterway # PH1100-6 Would it be better to get the pump with the standard...

I just dont understand why the would use an l5-30 it just seems like overkill. I emailed waterway to see if they sell any pumps with the l5-20 plug havent got a response from them as of yet.

My current pump died waterway 1.5hp 2 speed it had a l5-20 plug on it with a 12.8 amp draw a high speed. The new pump im looking at to replace it is a 1hp with a l5-30 plug on i,t the pump is rated at 9.8 amps could i switch cord from the old pump to the new pump since it wont come close to the...