Search results

I think there is a blockage in the filter or valve. I suspected the threads on top of the pump (going to the filter) were stripped because the screw in fitting popped out. I replaced the pump but it happened again. But, I've had enough with this filter and had been contemplating a new DE...

Now, I am curious about the PVC used. Are the PVC pipes available at my big box DIY store the same as those used by pool professionals when installing/repairing in ground pools?

I guess I can only post three pictures. But, the elbow that burst is new and has LASCO SCH 40 PVC1 imprinted.

Yes, the pipes that broke are between the pump and filter. Though we do get freezing temperatures in the winter, primarily Jan/Feb, I run the pump year round, adjusting my timer to run between 2am-6 am (we are in El Paso, TX, where the winter nights in Jan/Feb can drop below freezing, but warms...

So, I had a catastrophic burst of my pipes today. The problem started with my pump not pulling water from the pool. Having had this problem before, I started my troubleshooting: pump and motor working; impeller is in working order; nothing clogging the impeller; strainer basket in pump clear...

Hooray for the capacitor. Working fine now. Oh, by the way, I unwrapped the side of my motor and instead rapped it with a hammer. Maybe that is why it was so hot (get it, hardyharhar). I found out the new capacitors are slightly larger in size and would not fit in the existing cover...

So, I have a similar problem. My AO Smith 1 HP motor hums, then shuts down. I've removed the motor from the Haywood pump and am able to turn the impeller by hand. I also wrapped on the side of the motor with the switch turned on (humming), but it did not engage. I then gave the impeller a...