Search results

Re: Intermittent Code 92 (High Salt) on Intex SWG but salt i After posting last night I went outside to turn off the filter pump and noticed that there was a low flow alert. I replaced the filter this morning and turned the SWG back on, and it worked just fine. Do you think that low water...

Re: Intermittent Code 92 (High Salt) on Intex SWG but salt i linen, when I turn off the SWG and wait a few minutes and turn it back on I still get the 92 error. Actually today, the high salt error happened after a heavy rain which added a lot of fresh water to the pool. I will try adding some...

On Saturday (7/7), I ran my Intex Krystal Clear SWG (CS8111) for about 4 hours, then my kids played in the pool for several hours. After my kids finished playing, I turned the SWG back on that night for a couple of hours. Right after turning the unit on, it started flashing code 92 (high...

I have an Intex 16' x 48" Ultra Frame pool. This morning I unplugged the copper plates so that no more copper ions will be generated during chlorine production since our copper levels keep creeping up (currently at 0.3 ppm). I ran the SWG for about six hours today since the FC was a little low...

Re: Copper levels creeping up w/ Intex Krystal Clear SWG CS8 I found the statement on the Intex FAQ site ("When the Intex Saltwater System is producing chlorine under daily operating conditions, will it also produce copper ions?"): http://www.intexcorp.com/index.php/faq/ ... ord=copper Since...

Re: Copper levels creeping up w/ Intex Krystal Clear SWG CS8 Thanks for all the kind responses. According to Intex, "the Saltwater System generates a small amount of copper ions during its daily chlorine production. The copper ion output during normal operating production is about 3% of the...

Re: Copper levels creeping up w/ Intex Krystal Clear SWG CS8 Supposedly this SWG generates copper to prevent algae. If we unplug the cable, will we need to add something to the pool to prevent algae, and will unplugging the cable void the warranty on the SWG? Thanks for your help.

We have had our pool up for about 3 weeks now, and our manual says that the copper readings should be between 0.1 and 0.2 ppm using the Intex CS8111 Krystal Clear SWG. Our readings started around 0.1 and are now up to 0.3. Since copper doesn't dissipate over time, it seems like the copper...

Re: Intex CS8111 SWG stops making chlorine towards end of cy Thanks so much for your responses. I am glad that this behavior appears to be normal and is nothing to be concerned about. Thanks again.

We have had our new Intex Ultra Frame 16' x 48" pool up for about 3 weeks, and so far all of our water tests have been good and the water is clear. We have been running the saltwater chlorinator for about 4 hours each day, and I have noticed that towards the end of each chlorination cycle...

We have had our Intex 16' x 48" Ultra Frame AGP w/ SWG for about two weeks and are having trouble vacuuming all the dirt off the bottom. We are using a Walmart Summer Escapes pump (1075 gallons per hour) attached to an HTH vacuum head to do the vacuuming, but it seems like it is pushing the...

Re: Just got Intex Krystal Clear SWG AG pool - No Chlorine H Sorry for not responding sooner. We followed your suggestion and ran the SWG for about 12 hours straight. We also added about 10 lbs more salt. It finally started making chlorine and the water has been clear. Thanks again for your...

We just set up our new Intex Ultra Frame 16' x 48" above ground pool. We live in south Louisiana. This is our first pool, and we are not sure what we are doing wrong. The capacity on this pool is 5061 gallons, so we added 125 lbs of Diamond Crystal premium pool salt and ran the filter pump...