Search results

I have a Compupool C35 SWB that recently fried the board and melted the end of the cell, including melting down the protective cap/cup that covers the wires. :mad: Since you can't get them without ordering a whole new SWG (which I don't want to do!) I was wondering if anyone had an old one...

Hi - turned on the pool heater today and noticed that it cycled a few times. Took off the cover and noticed it was shooting flames out the edges. Disconnected it, blew out the leaves and debris and it's still doing it. It's been turned off and gas supply off as well. Do I need to disassemble...

Hi - I believe I have a pump impeller failure, as it's not turning anymore and I get a 'whining' from the motor. The pump is about 8 years old, and this is the second season I've had issues w/it. Last season I replaced the capacitor for the motor after it failed. I get modest pressure on my 3...

So when I cloud the pool last year I removed the spa jets, but did not re-instal the outer rings between that hold the bench to the pipes (because they broke when being removed, and I ordered spares). So basically I just plugged the pipes with the plugs, but they were free to move behind the...

Hi - have a 240v 1.5 HP single speed Hayward pump (motor model UST1152 or C48L2nN134C1 ?) It's getting voltage to the wiring in the back, from the timer. The impeller also spin freely. When I switch the power on at the timer, I get nothing on the pump. Not even a "whirring" sound. Can...

Opened the pool today to some greenish, could still see bottom in shallow end, dirty water. 2x over the winter I drained off about 8 inches of water due to storms and snow melting on cover. It's been a tough storm season in NJ. Levels are FC - 0 CC - 0 PH 7.0 Cya - close to 0 TA- 10 I have...

Hi - have a 16x32 vinyl pool, for approx 19k gallons. Initial salt reading (test strips) was less than 100ppm. added 12 40lb bags of salt about 5 days ago, and they're completely disolved... now the reading is 960! According the the salt table here http://www.inyopools.com/salt_generator ...

Hi - am going to tackle the install of the CPSC 36 this weekend on my IG pool. Besides the various PVC fittings, is there anything else that might be needed from the local hardware store for the install? I notice I need to connect the power supply to the grounding lug (am I using the right term...

Ok, so I have a BBB vinyl pool that I'm keeping at FC - 3-6 CC - 0 TA - 90 PH - 7.2-7.4 . rising recently to7.6 CYA - 70 temp (heater) - 74-80 It's been like this for a few weeks. Water is very clear, but occasionally see some cloudy sections, particularly after using the leaf rake and...

I have these light goldish stains on the bottom and a bit of the sides of my vinyl lined pool. They don't brush off w the brush or pool robot. They were there last year as well when I closed, and don't appear to be algae or growing . My FC is around 7-10, cc 0-0.5, ph 7.2-7.4, ch 100, cya 60...

So - first time pool owner. Opened a few weeks ago to clear water but a 110 CYA which would be impossible to maintain. Removed all pucks a week or so ago and will be doing BBB. Replaced about 20" of water this weekend, ad started up the pump this am. After 2 hours of pump time, here are my...

Hi - new to pool ownership and would like to install an SWG this summer to eliminate the need for toting a ton of bleach to/fro the pool. I currently have an inline chlorinator which I don't use, since those darn tabs are so evil. Anyway, I'd like to replace the chlorinator with an SWG...

Hi all - first time pool owner here. Just opened the pool last weekend, and then got hit with some lower than expected temps. Typical luck, right? Pool company opened it to clean water last weekend, and I've been running the filter 10 hours/day and the vacuming every night. Anyway, I just got...

Hi - first time poster, long time lurker. Great site I have a 16x32 IG vinyl pool. Hayward 48 DE microclear (DE) filter. 1 skimmer, 1 return and two 'jets' by the steps/bench at the far end of the pool. on the edge of the pool by the step is a twist cap that used to adjust the amount of air...