Search results

@swamprat69 thoughts? Based on these readings, do you think everything looks good and it's time for me to move onto the next step, or am I missing something? ------I thought I provided all the answers you were looking for in those PDFs I uploaded in a previous post. The PDF file, Heater Testing...

Mr @swamprat69 Any ideas from here? You mentioned the combustion chamber previously. Have you seen anything out there showing how to check/clear it? I looked around, couldn't find anything. Is it safe for a DIY`er to do, and play around in there? Thanks as always.

Replaced the blower vacuum switch with the correct model. When I turned on the power, first thing that came up was the bd code. Tried again, and every single time after that I just received the AO error. Never saw the bd code again. So, same result, 3 or 4 clicks, then just sits for a bit, then...

Replaced the blower vacuum switch with the correct model (the other one did work for quite a while before this problem initially started.) When I turned on the power, first thing that came up was the bd code. Tried again, and every single time after that JUST received the AO error. Never saw...

Hi all, Water temperature is currently 62 degrees. Chlorinator gives really low Salt reading, 1700. I read about the effects of cold water on Salt readings with chlorinators. I have some salt test strips so I decided to try that. Gave the exact same reading. So, at 62 degrees is the test...

The blower was already installed when I bought the house 8 years ago. I've never had an issue with it. And when I look up that model 2 wiring versions do seem to come up. Could it be something to do with the board it's connected to? I believe the pressure switch which came with the house was the...

a

Hopefully this helps out. I checked everything in the list on page 58. I've tried all 3 switches, and both fans, and swapped the pressure hose with another silicone hose. Is there any way to test a switch? And THANKS!

If I did want to check this (blockage to airflow and dirt in various components ) which components should I look at that I can safely get to? I've never open up the heater before, so if I do, is there anything I should be careful of? I'm interested to go on in :)

Any last thoughts, suggestions, easy checks, before I call the pool store? Just clicks twice, then sits for a little, then AO. Nothing else happens besides clicks, no blower spinning, no air coming on. Could it be the blower switch wiring? How would I check, or replace that wiring?

Thanks, I added a response and some pics. Thought I was replying to you but I think I just added to this thread instead. Had 14 pics but would only let me upload 10.

Thanks, yes, I found the manual when I was looking around for information. Do these pics help? Let me know if you require a different angle or close up of something in particular.