Search results

Water pressure has stayed at 15 and we installed a heater and no change.

Every time I take out the basket out of the skimmer a small funnel forms and the filter loses prime. When the basket is in place I have no issues. The water level is high enough. My pool is about 4 years old and I noticed this last year and now this year. The only think different I did was...

I just installed the raypak 156a mode. it's 150k btu natural gas unit. My heater is about 12 feet from the pool and 4 feet from the filter and pump. Pool was at 70 now it's up to 83 so far no issues

As someone with no experience with a heaters. Learned a lesson don't touch. I plugged in the wire back in which. I though was causing the first problem. And everything is working fine. Thanks

thanks I am lost. The filter says 15 psi and that's what it said last summer so I am not losing any water pressure (or I don't think I am). I changed out the filter cartridge and nothing. I checked the pool and no water bubbles coming out of the jet and it is just as powerfull as last summer...

In theory that is what I should have done. He left his tools so I'm not worried about him not coming back. I'm assuming the falt I am getting is due to no water. I know there is gas because he tested it. Tomorrow when I open the pool I will test it out.

I wanted to make sure it was working before the Plummer left. I am opening the pool tomorrow.

I removed the two red wires and it went away. Now its say Hi Limit 2 Fault. Is this because there is no water or filter attached?

I just had my plumber run the gas to the heater. I have gas to the unit. When I turn the unit on it says timer/Fireman SW . Any ideas? Is it a safety feature because I do not have water running yet?

http://s280.photobucket.com/user/Gfire520/library/Mobile%20Uploads Does that work?

Stupid question but what's the best way to post a picture

I am looking to install a pool heater for my 12x16 semi above ground pool. My issue is I built a deck around the pool and I keep the filter under the stairs. The plummer told me it wouldn't work to put the heater under the stairs. Can any other type of heater go under a stair case. There is...

how to I connect the flex pvc to the filter, motor and pool intake and outtakes? Right now I have the metal clamps.

I currently have an above ground pool surrounded by a deck. I run the hoses under theck about 15 feet to the filter. Everything seems to be runnign correckly. I am using the cheap hoses that came with the pool, but one seems to have a very small leak. What is a good strong hose to run under...