Search results

I picked up a 18x33 oval used in good condition with a new liner , I recessed it 2' and am in the deck building process now , the website for their pools have parts if you need and I have no complaints about the product at all except the directions for an oval are useless the top and bottom...

I rented a backhoe for 300 , plumbing cost under 100 , electrical is under way I only have to dig the trench I have the wire already and we got the pool for 1500 the dirt leftover will fill some areas but plenty will be left over for the neighbors if they want some , it took me one month in...

I used the white foam and the bottom track was even with my foam so the cove moulding butted up nicely and I taped all the seams and also the cove molding then set the liner in place . I also tried the shop vac method but the pool being so large did not really work for me .

It has to be a pretty powerful shop vac , but tape a cardboard with the hose from a shop vav then the cardboard over the skiMmer area and tape seal the area and then the return hole tape over do not cut the liner till you have it in place, you tube has a few Vids of liner installations you can...

I used a polystyrene. It made a nice addition to the feel of the wall and bottom. It was my first pool install and my friends and family are quite impressed with the feel and comfort , I recessed the pool so my walls feel so much more solid vs spongy.

I used leveling blocks for my oval pool , 8x12 on the sides and pavers for the oval ends , 1/2" polystyrene on top of sand put my liner flush and level with the top on the bottom rail added cove and liner and water ! It really was that easy.

I just finished an install but took it a step further I recessed it 24" . Oh yeah and it was a used pool worthless directions and verry little to no help from the kids , it took A few peoe for the wall but all in all take your time level check and recheck it will never be " perfect" but enjoy...

I used 1/2" polystyrene wall board on my pool bottom and also on the walls all taped well and a cove moulding I an attest as this was my first pool and first install that it feels great on the feet and knowing my liner is not touching the metal wall gives me some peace of mind that the liner...

I am thanking everyone who had a asked the questions way before I started my pool project , we are new to pools and the AGP was a used unit , after several weeks researching the info I wanted to learn and do we started our design , I had a goal to be built by May , well down in south Louisiana...

Re: Location of Skimmer & Return Water- On Oval 18'X33'X52" I set mine in a SE corner this way makes it easier for the hard wiring more accessable to connect and not in sight from either the house or soon to be pool house, which now is part of my shop. Most of our winds are from the south as we...

Breaux bridge area , and from Paul Simon's song Cecilia !

Yes I did wipe the tip after each drop so as you said I am inthe 350 range , as this" test kit " says turns red the do the math , though as soon as I saw complete pink I did the math. This sparkly blue water now has the green hue since it has been almost 4 days filling this rascal and the rain...

First test with wal mart tester waiting on the tf100 I was able test Cl that was -.5 next was Ta based on 35drops to turn pinkish puts me at 350ppm turn darker took up to 50drops that's over 500ppm and obviously cya at 0 . So I need a starting point from here , I've got a 15,100 gal pool and...

Hello all , I've been lurking around here for weeks researching information so I could begin my AGP construction , I have recessed it and have just about finished up the final steps on construction H2O is being added and the wind has blown in some funk from the field behind our home , it will be...