Search results

I have had a pool for 10 years and have been on an off the site. I never had good luck with my SWG because I was too cheap to run my pump the time it needed. So I switched to chlorine pucks and of course my CYA skyrocketed. Approx 1 week ago I drained 80% and refilled and did a slam to clear up...

i had been using pucks for a year and a half and cya was through the roof so I did and 80 percent drain and fill. So I am assuming low salt as we have good water. I added 400 lbs of salt and according to my new aquachek salt strips I am at 4000 ppm. The new cell and sensor says I am at 4700. I...

My aqualink rs has been working fine. Today I got a new salt cell Jandy 1400. I replaced the cell and now my aqualink on my PDA says lock out and the hard buttons do not respond. I had to pull the flow board because mine was old but installed as the instructions with no board. FYI it did have a...

I have an aquapure 1400 and after the cell went out several years ago I have went to chlorine. I would like to just take to old cell out and put a piece of pipe in. I am kind of ocd as I don't want to cut any pvc. I am looking for the threaded ends that will fit a jandy union. I really dont want...

This will be the 12th year of my pool and knock on wood I have never had to replace the pump or pump motor. I know that is a lucky streak. Now when its cold I can hear a little bearing noise so I know its a time bomb. I have on old aqua link with the pda. It used to be a salt pool but I got...

I've had my pool approximately five years and out of that five years I've replaced my cell three times but only once I've had to pay for it. It's a Jandy aqua pure 1400 and now it's back to throwing error code 120 and 121. It should be under warranty but in case it's not would you recommend...

Aquapure 1400 I have had my pool for about 4 years and it seems like every year I get an error code and the pool company comes and replaces the sensor. I am getting error code 121 right now. I am guessing that is the sensor again. Is this normal, I am not thinking it is. If not what could be...

Ok he is the story. I went out of town for 2 weeks and came back to dark spots on the bottom of my pool. Upon closer inspection it is algae that has taken hold in the pebble finish of my pool. I confirmed it is algae by placing a puck in the spot and it will turn it white in an hour or two. I...

My SWG died right as I was going out of town. They got it fix but I was gone for 2 weeks and alge got ahold of it. I know how to shock but have a question on what type of chlorine I have. I went to the pool store and asked for the cheapest way to put straight chlorine into the pool with no...

I did a complete test on my pool today....it is a 3 week old plaster pool. My ta was 40 and ca was 80 and has not risen in 2 weeks..everything else was good. What do I do with the TA 2 weeks ago it was 60. I have been adding acid daily. Also since the ca has not changed should I add some calcium...

My pool is 8 days old and all my builder has done is throw 4 pucks in to keep some chlorine in it. I got my test kit today and need some help. Numbers Temp 59 CYA <20 PH at least 8.2 TA 60 CH 80 I think did...turned pink then went clear never blue. FC -0 if it is the test in with the ph I...

I have an 19 month old that loves the water. We are set to move in to our new house in about a week. I know supervision is the best prevention but I would like other safe guards as well. I will be putting an alarm on the door. I would like to avoid a fence or cover. What types of alarms work...

I am building a new house and everything is going good. Part of the house plan was always a pool. Dig starts tomorrow can't wait. I will try and post pics as they go. Here is the computer model.