Search results

had the Dolphin E10 for the past 3 years now-- best one I have had .. I just upgraded to the fine filter as well -- it is a good upgrade if you fine sand or small beetles in my case

Just got mine is as well -- Very pleased with it so far.. Very easy to clean the basket--I hated the bags in the pool rover jr .. may look into getting the fine particle basket as well

Been running one for over 7 years with no issues with pump plug ...

My last Swimline I got 7 years out of it... I think that is about normal around here.. I am full sun till about 6 pm everyday... I run about 3-4 ppm Cl and run on low speed all of the time .. I think Swimline is the major maker out there along with GLI.. I always get the Perma 25 series as...

I think you have to look at everything with the pool.. How long are you planning on keeping it? Budget ?? Going to use a SWG ?? Self install or have it put in for you... Here is my experience.. I am now on my 2nd above ground .. First one lasted 16 years.. Yes it was a cheaper brand -- an...

There are 2 valves --but the one on the return is in the wrong place --it should have been after the SWG and before the return fitting... I will fix at the end of season and add a valve there .. So if I have trouble with the turbo cell --I can turn off the there an not worry about the water...

Here are some of my install pics.. Sharkline Venture Hybrid 52" --U bead liner.. used local installer--he has been installing above ground pools for about 25 years.. easy to work with.

that is fair amount of damage.. I would tear down and replace. I am in the same boat after 17 years of one -- Pool is at the freight company have to get it here to the house

Have had one for several years ..no issues here at all .. going to replace cell this year after 4 years of service..

I am looking at the Radiant/Metric Pool series.. Only down fall I see is cost--but which is not too bad if it will work they way I want it.. 1. Install as an above ground pool for 2 seasons--then take down and move and install as Inground.. I know liner has to be replaced and the brackets...

Anyone been brave enough to give the Deck and Concrete restore a go yet ? I am tired of the constant sealing and staining ...

Magic Eraser works wonders and you dont have to add any chemicals to the pool...

I found this... these may work for you http://www.asahiparts.com/product.php?p ... =26&page=1

here is a link to site that might help--has some pretty good pictures included on it ..http://idoneitmyself.wordpress.com/2009 ... lightning/

Check local AC supply houses--these are fairly common .. You can also ways use a higher voltage cap if needed -- the uf needs to stay the same..

Double Check on the back of the receiver-- Most of the Yamaha's had a switch for the 6 or 8 ohm also.. Also might help to get a speaker switch box for the selection of speakers.

Normally a unibead can be used 2 ways-- one as a J-hook directly over the wall with no coping strips just the top rail clamping it down to the wall.. Then you can remove the top j-hook to install into the beaded liner receivers.. go to this link :http://swimline.com/swimline/installation.html...

Re: Yes pool fans, it's another build/install-Prince George Looking Like a nice install so far... They make those pools across town from me here in SC. Will be watching this install for sure.. They have a factory store that does installs locally here--been looking around and they have some of...

this is close to the one i have except that i have the 2 speed version... got mine from the same place... http://www.ebay.com/itm/Hayward-Pro-Ser ... 2a16bcae52

cycle the diagnostics button--you will see r-?.?? that is the version number .. If you have the 1.40 you maybe stuck with the T 5 like me

they still make the T5 or GLX-CELL-5-W --it is the same one used for the Aquatrol units... Do some searching on google --they have them all over. What software version is the Aqua rite unit-- I know some of the older versions of firmware--you could not change the Cell type.

Go For it it.. you wont regret it--I have had mine a year now.. Only thing I can say--the bag is not that good of quality... I did find some filter bags from Mcmaster Carr that is 100 micron and they work great as replacement for it.

By those numbers it is generating.. What are your latest test results for the water ?? The CYA is very important for these units. Also what kind of run time do you have on the pump ??

I have always used the Wika stainless glycerine filled for mine.. Although they are pricey--they last for a long while here is the link to the one I use http://www.gaugestore.com/prodinfo.asp?number=36506

after getting the pool to normal level.. I usually only have to add one bag thru out the summer. It all depends on splash out/backwashing/filling up. But at 5 bucks a bag-its not that much to worry about.

Once you get used to the methods and testing yourself -you will save TONS of money. I normally only spend about 35 bucks a pool season on chemicals. Make sure to get a good test kit.. If you have questions--there are plenty of people to help on this forum.

35% -- 13,500 gallons ---pump on all the time in low speed -SC

With the past 3 years on the SWCG... I have only been thru one gallon of acid --to control the Ph... But I do keep a good check on the TA--Baking Soda is cheap.. I normally only spend bout 35.00 a year on chemicals here and 75% of that is CYA--rest is the 5.00 bags of salt from home depot.

Sounds like the installer is using the flow switch as an on/off switch for the MS-10 --this can be a bad thing --if the switch fails and tells the unit to produce when there is no flow from the pump. here is a list of common parts and prices--may not be the best prices --but least it is a...

Sounds to be an internal short on the transformer. If you are handy with the multimeter--you can remove the secondary wires that is providing power for the logic board and test there.. This can help determine where the problem is.. I did find the manual here--but it is just the basic...