Search results

The salt reading is to high on the Aqua Rite board, try to reset and the Diagnostics bottom stop working, it doesn't change, it's steady on 3800, the test we made made and the pool store test is very similar 3140 and 3220, the temp. is 88 F. that may affect the high reading, but what about the...

After trying and failing almost everything I change the electronic display that was erratic and unresponsive finding out that it was only one of the problems. I got in touch with John, from Hayward and he advised to replace the cell and that was it, an exhausted cell. Even though our cell was...

Well after receiving your message I did it, I pulled it out and reinstall the display and nothing happens but since my friend has the same unit we decided to swap displays and as we suspect his was responding in my set up and mine was acting up on his. I went on and bought a new display...

I also thought about that and remove the plate, we did with no luck, it doesn’t change and if it does is at its on pleasure, very erratic, in this pics you’ll see that it shows t 15 and now instead 2400 it reads 2500, nothing extraordinary but it’s a change

As I said before I can’t control the display, that was the first thing that I was trying to do because of the false salt level. Pressing the diagnostic bottom doesn’t change the display, those readings just come up and most of the time 83 or something very close to the water temperature reading...

Here are a couple of pics of the AquaRite display as you can see in looks like is the temperature 83 an generating then it changes to 27.8, shows the check salt light flashing, but not always, and always generating, the salt is actually kind of high 3500. I got the cell checked and it passed...

No problem, I can send a picture of the unit, I just came back and the cell PASS, I installed and the display 82; power and generating lights on steady pressing diagnostic don’t show any changes.

mas985 thanks for your response, as I said I’ll take today the cell to the pool store to be checked. But yesterday I removed it to inspect and clean if it was necessary, actually it was fairly clean since we inspected at the beginning of the season, but when I installed back the “check salt”...

I’m taking the cell tomorrow to see if working as it should, I’ll post the results of the test and go from there replacing parts. Hayward was recommended to us, as the most reliable but as I said before we already replaced almost half of the system installed less than 4 years ago and now is...

Well actually it changes constantly or on the other hand it’s steady on what I think is the temperature says 80, even when pressing the diagnostic bottom to calibrate it doesn’t respond, remains steady. I try turning it off and on and I never get to see the level of salt again, except when it...

We set up the OnComand System and AquaRite Clorinator on February 2013 on an in ground 20000 Gl. pool, since then already the variable speed pump was replaced about 2 years ago and the AquaRite PCB 6-month after both under guaranty. I do have a LaMotte 2056 ColorQ that I have been using for...