Search results

If I do this the voltage measurement registers so briefly that I cant even read the value. Then it shows as open / no V.

Just swapped in a new T15 cell, and the controller is showing same errors In auto 2200 71 32.8 0 78P -0 AL-0 R 1.59 T-15

I do have a heater, and we used it yesterday for the first time in months.

auto to off; 3100 72 32.7 0.00 78P -0 AL-0 R1.59 T-15 Auto 3100 72 26.5 7.42 78P -4000 AL-0 R1.59 T-15 Off for 1min then auto 3100 72 26.5 7.37 78p -3900 AL-0 R1.59 T-15

3100 72 26.3 7.17 78p -3900 AL - 0 R 1.59 T - 15

Its a texas pool; runs all year. I did put it in service to look at the cell, but otherwise its been running for 4.5hrs so far today

I just noticed bubbles coming out of the pool returns so went to look at the swg controller. Seems fine now aside from incorrect salt ppm vs actual measurement.

It was working fine (afaik). Flow is good

The diagnostics remain the same in auto vs off Amps 0.00 Instant salinity -0

It was installed 10/19 so im at 4.5yrs. Out of warranty.

Diagnostics did not change for any auto/off/post off scenario 2300 72 32.5 0.00 78P - 0 AL - 0 r 1.59 t - 15

Not sure if my cell has reached end of life, or if its having other issues. It is about 4 years old. Taylor K-1766 says 4000 ppm salt (too much, i know. More was added based on reading of SWG). SWG says 2300ppm. FC in pool is dropping. Now 5.5ppm. How do I know if I need a new cell, or if...

JB on the way! Thanks again One last question; any place I can score a new light for a fair price? All I’ve seen is $1000/ea and that seems awfully steep

@JamesW Where can I find this JB? Will the big box stores carry it? Thanks for all of your help

Typo; Jacketed/insulated

Thank you, especially @JamesW and @1poolman1 Once I got the ground and remaining light wire out, I couldn't get the ground to come back out into the JB. So I will replace with jacked wire and replace the JB as recommended. Y’all rock!! And Dang that water is cold already.

As the existing ground has no insulation, should I replace it with wire that does or doesnt have insulation? Maybe with insulation would pull more easily? Many thanks!

i understand that. But the lug itself isnt connected in any way to the light. So what is it actually grounding? The light niche seems to be non metallic, so not that. By supplemental do you mean it is not connected to the light and is sort of a dead-end ground? I just dove back in, and I cant...

Pull the ground out which way? If i switch to a 12v light, how will that impact my spa light? They were wired together in that JB. Would need to replace both, and I presume the controller?

Light’s guts.