Search results

purchased a kit in April 2020 and I think mine is doing the same. Last three reads mine says 35-37 for alkalinity and kept adding baking soda. Used an older drop test and that one says I am at 140

I was trying to keep high to SLAM at 24 the last few days to see if it would help but its not

Pale green color

So I just did a chlorine test 24.5 FC 0.5 CC The other test above was after I super chlorinated with SWG

This was numbers two days ago. I have been keeping the chlorine in that range since then.

Hey all, can a pool pump be too much for a sand filter and not clean properly? Purchased a 1.5HP Superflo and had a 300 lb sand filter and for some reason I cannot get water clear and has a light green tint to it. All my numbers are correct and I have been trying to keep chlorine level high to...

I have been out the loop on following and thanks for reply.

Why would 40 be target for CYA when range is saying 70-80

I have no option to change anywhere. Gear does not show anything or place to change

All settings actually do this. Here are a screen shot FC is set to 3 but I want to change to 5 I change to 5 but when I get out of this and click FC again its back to 3

Sorry for possible dumb question but I am usi g the Pool Math app and for some reason cannot change my targets. Not sure what I am doing wrong. CYA says I should be at 70 - 80 and I am trying to set target to 70 but it keeps saying my target is 40 when I am adding my log information

Yes it did but I took it off and put another one on to verify and that one shows 40 psi.

Bought a single speed 1.5hp Superflow from local pool place since pool was turning slightly green after no filtering for 2 days.$200 more than online prices. Everything is up and running but I may have a dilemma. My sand filter tank show a max pressure of 50 and when running pressure gauge is...

Received pump but I am being told by local pool place that it is too much for my above ground pool and this is for an inground pool. It runs for about 30 seconds and then shuts off like it is in a bind. 17,200 gallons with 1 1/2” pvc piping and 300 lb sand filter which says filter 63 and backwash 40

Mknauss, Thanks. It may be a small overkill to have a 2 HP, but I figured if I ran on low speed for 8 hours a day, it should work well. From figures I need to get 39 gallons a minute to cycle pool in 8 hours. 16’ of piping from skimmer to pump. What I usually do is run 4 hours in day and then...

Well after reading good reviews, I purchased a Pentair SuperFlo 2HP Energy Efficient 2-Speed Pool Pump 230V | 340044 to replace my 1 1/2 hp Pentair Dynamo single speed for my 27’ above ground.

Thanks, I will look into this place. Only two pumps i am seeing for above ground Dynamo Pump 1-1/2 HP 2 Spd. (no cord) - 340206 PowerFlo Matrix Pump 1.5 HP Dual Speed - SP15932S They are both only 115v and i currently have 220v connected. I also have a timer so not sure if they can be connected...

TIA and I know this has come up regularly and I did try to search but I currently have a Pentair Dynamo 1 1/2 HP pump thats leaking at the seal and have changed the seals twice so far. It works but starts to leak after a couple months. I have a 300 lb sand filter and was wondering what would be...

I have a 27’ round Radiant pool and installed it myself in 2014. It is buried 2’ in ground and installed a cement collar around it and back filled with 3/4” limestone exactly like I was told to do by Radiant. I have a ground wire around the pool, so I feel I did everything right. Using a SWG...

Really like the app so far and thanks for making. One thing i thought would possibly be cool and may have been mentioned, too lazy to look, would be after you input your numbers an option to see a report of what you need to do to correct the areas that need to be corrected on one screen or print...

Radiant pool

Look at the Radiant Pools. I have one a love it.

you all are lucky to beta test. Cant wait to get to purchase and use it from what i am hearing you all say about it

Thanks for responding. Need this app. I do use the online excel sheet currently and still the old app.