Search results

After you rule out gas supply issues, the next thing to look at is the flame sensor. When the heater ignites the flame sensor sends a signal to keep the gas valve open but if the sensor is faulty the gas valve will close immediately. Here is a link to the troubleshooting manual for the heater...

Check for corrosion on the controller card. It will show up as a white crust, specially on the circuitry leading to the SFS sensor, this will explains the intermittent issue. From your pictures I noticed that the keypad is facing the house, if this isn't done purposely you can turn it so it...

This fitting is perfect for the return as well for the nicheless light. You don't have to install the fitting right away, you leave a piece of 2" PVC pipe (I prefer sch-40) and after you plaster the pool you can cut it flush, glue in the fitting and install the eyeball return fitting or the...

Over the time the motor that drives the clock suffers some wear and it seen to slow down , if you feel comfortable working with electricity and are DIY incline you could easily replaced the motor from around 25-30 dollars. You can find it following this link. Amazon.com : Intermatic WG1573-10D...

The method used here to determine if the temperatures is the right one is not an accurate one. The clue to determine this is on the motor's label . the motor s a insulation class B. -Without getting too technical- that means that the motor can run at a temperature of 266 degrees Fahrenheit...

The method used here to determine if the temperatures is the right one is not an accurate one. The clue to determine this is on the motor's label . the motor s a insulation class B. -Without getting too technical- that means that the motor can run at a temperature of 266 degrees Fahrenheit...

To verify that the leaks is coming from the skimmers, before doing any tunneling or cutting, you can plug in the skimmers and check the waterline level in a 24 hours period, if it doesn't drop that inch you mentioned then you will have a confirmation. Enviado desde mi 6039A mediante Tapatalk