Search results

Re: Installing Liquidator and Plumbing on Above Ground Pool When you partially close the skimmer valve you are creating more resistance in the flow and therefore more pressure. Too much head can be bad for a pump, but you are going to be no where near that with just closing the skimmer a little.

Welcome! There is a wealth of information here on this site to help you get on the right path to maintaining your pool. I would start here Pool School. If you have any questions just post them up and the great people here will be happy to help.

If your CYA is really 100 that floater is not going to keep your FC high enough in my opinion. This will ultimately cause more problems when organics are introduced to the pool bye mother nature or bather load. According to this chart Chlorine/CYA ChartYou should maintain a FC of 7 - 12 ppm...

How did the pool store test for CYA? Was it a black dot based test, strips, etc.? Most of the time you will be more accurate than the Pool Store so I'm not sure if you should drain just yet. Some others with more experience will chime in soon.

I must say that the Needle valve has been well worth the cost. I can control the flow very precisely with it. It's a great addition to the LQ and I recommend it to everyone who uses one. Thanks Bama for the tip.

You should read through "Pool School" to find out what really turns hair green. Hint; it's not the liquid chlorine. There is a link to PS in my sig.

If I'm reading correctly I believe your main drain is plumbed through the skimmer. You would use a diverter in the skimmer to control the suction on the main drain. Those are connected at the skimmer and coming into A. Then the flow continues through the pump and filter out B. Next B is...

Happy to report that the LQ is doing it's job perfectly so far. I am maintaining a FC of 5 with the solar cover on during the day. I droped the ph from 7.5 to 7.2 because I've read here that a lower ph will help with the WS. So far no sign of WS build up. The tubing is turning a bit opaque...

I also believe you should slow down a bit and stop just throwing stuff in there. The folks here can help you get those stains taken care of in a very timely manner, but only if you follow their advice and don't add anything that is not suggested. Often times the stuff you buy at the pool store...

If your CYA is really zero, then use the pool calculator to see how much you need to add to get it to 30ppm, then add it and treat the pool as if it has a CYA of 30 when it comes to shocking; it will take a week for the test to register the addition. Can you post a full set of test results? I...

I do test daily (well most of the time) :oops: , but usualy I only need to add bleach every other day. I add enough to get to the max of my range according to the cya chart in Pool School, then let it drift down to the low end before I add. If I have a heavy bather load I usualy have to add...

I got it at drillspot.

Liquidator is installed. I've got the bubbles out of the line now. These were taken before that. I am able to get the flow ball up to around 4.5 on the flow meter if I crank it wide open. I have it set for 2 now. How do my numbers look for controling the WS from the LQ? FC 3 CC 0 ph 7.5 TA...

Good Question. I could also use this info. I got my LQ today and will be installing this weekend.

Thanks Bama. Can I put the outlet side in the pump basket drain plug like I've seen suggested here before or do I get better flow by putting it on the pipes?

There is a Jandy 3 way valve behind the filter in this pic. It splits the return into two, one is the standard AGP return; the other is an additonal return for a sweeper and circulation about 70 degree around to the left of the filter

Thanks Carlspan. As Requested here is my set up. The ground around my equipment is pretty wet at the moment. We are having some serious rain here + I went to clean the pump basket and forgot to turn off the valve, Oops!

http://www.usplastic.com/catalog/item.a ... rchresults Just want to be sure this is the right valve before I spend 50 bucks on it? It's the Hayward 1/4" PVC NPV Series Neddle Valve.

Thanks for the suggestions. Bama, which of these did you use? http://www.pepplastic.com/index.php?main_page=index&cPath=3_162_2620&zenid=9057e4e969c03ba2b9e49bc65be0ae1b The 1/4", 1/2", or 3/8"? Never mind I see that you used the 1/4", Duh! I should pay more attention sometimes. Also what...

I ordered http://pstpoolsupplies.com/hasa-pool-the-liquidator-updated.aspx a few days ago and while I'm waiting for it to arrive I thought I would find out from those of you who have The Liquidator, What would you do different if you were to install it a second time? What tips/advice would you...

Boo Card, Go CATS! haha! I'm just outside of Prestonsburg, but I work in Pikeville. It's good to see another KY forumite. How long did you live in KY? What pulled you from the area, work?

Here ya go.

I don't have one yet (I'm at work). I'll try to get one up this evening.

This is the start of my second season with bbb. Last year was a great success and this year is starting out well. I opened to a clear pool. I've had the pump running all day after I added some chlorine this morning. Got home and here are the test results. FC - 6 CC - 0 TA - 80 ph - 7.5 CYA...

:cheers: I found this site last year after I bought a foreclosure with a neglected pool monster. The cover was half in half out of the blackish green murky mess, after the Pool Store giving me the run around and obviously not knowing what they were talking about I went in search of more...

Just wanted to send out a big thank you to TFP. The advice I've gotten here has made this swimming season great & the BBB method is so easy and inexpensive. While everyone around me with a pool are fighting the green monster, the wife & I are enjoying relaxing days by the pool. When they ask...

Did the overnight test. Here are the results Night Before: FC 7 CC 0 Next AM: FC 6 CC 0 Looks like I'm good with the organics being dead. I'll work on upping the CYA slowly and maintaining the FC levels. Thanks TFP

I'm still new around here & the BBB method but I will attempt to tell you what I've read in Pool School from this site. I'm sure someone with more knowledge will be along shortly. That feeder uses pucks and pucks contain Chlorine + CYA or other things that you may want to control separately...

Providing that the home is priced at current market value & you are offering to remove & resod should make the pool a non-issue. I cannot stress enough that pricing at current market value is the most important factor for selling your house. Good Luck! A pool can become a huge negative if...

After running pump for a few hours. Here are the numbers. FC .5 CC 0 ph 7.5 TA 70 CH 200 CYA < 20 I added some 6% to get FC up to apx 5.